What's new

pipe

  1. JaseYpk

    Turbo Elbows - Different types?

    So, the convenient time has come to do the swap, and i've found a few different types, so if someone could be so kind as to point out any differences, then please go ahead! :) Type 1 - Standard elbow, just one big pipe Type 2 - Elbow is split into two, the smaller of which comes from the...
  2. dave_t

    Clutch - best Bang for your Buck?

    I'll be picking up my new S15 Spec-R and its apparent that the clutch is slipping on full boost, so she's going to need a new one. i'm trying to decide on which clutch to go with. I had an XTD stage 3 in my S14A which lasted 3 years, 2 years for the previous owner, and a year during my...
  3. D

    FS: Greddy TD06 turbo kit

    As above, I've used this kit for a while now but have decided to go for a change. Parts included... Reconned Greddy TD06L2-20g turbo Greddy topmount manifold Greddy wastegate Stainless steel screamer pipe Front pipe from turbo to cat joint Oil flow and return pipes Plugs for water outlets on...
  4. M

    S15 spec r From Aus SA

    Hey guys im Michael from Adelaide Australia I own a pewter S15 spec r it has currently blitz se front mount tomei dump pipe hks front pipe straight through muffled cat kakimoto n1 80mm exhaust hks mushroom pod kts intake pipe pivot raizen earth kit power enterprise BELTS tomei spar plug...
  5. JaseYpk

    WTB: Shiney Hot Pipe (Turbo connecting to the pipe that connects to the intercooler)

    Ok so i fitted my FMIC and now i have shiney pipes. but i want rid of that one remaining pipe between the turbo and plenum. The black metal one that comes out from the turbo and tucks down to where the WMIC used to be. Done a lot of googling and cant find anywhere that sells any?! But i've seen...
  6. XTension

    S15 air intake pipe with blocked take off?? why?

    Hi, I´ve noticed something strange in the intake pipe that goes to the Turbo. There´s a small take off blocked by a screw. I´ve taken this pick yesterday. (little blue pipe with screw in pic) Help me out. What is this for? i guess i should know it, but i can´t really recall from my previous...
  7. spoonman

    Body heat shield, where dump pipe & front pipe are.

    I was looking into heat shielding the cars body where the dump pipe & front pipe are. As the factory ones are going to get replaced, most likely with stainless items, so alot of heat will be getting omitted. I dont want to use heat wrap as this just causes the pipes to crack and the stuff starts...
  8. K

    WTB: CES front/dump pipe

    looking for CES front/dump pipe good condition thank you
  9. T

    WTB: Top mount turbo (perferably complete kit)

    As per title a good qualtity topmount kit (more of a complete kit the better) (no Cheap xspower stuff e.t.c) including turbo stainless exhaust manifold downpipe to mount directly up to the cat pipe, external waste gate screamer pipe or plumbed back in. Oil and water lines. WHYG? or do you know...
  10. Fasthands

    Nismo R-tune Spec R,

    Well folk's here she is now in my hands.:nod::) I have been busy fitting the following parts and all is going well so far..I can't lower the suspension any more as it's at its lowest on the front, and hardly any thread left on the rears. Shame as a little lower would have looked spot...
  11. S

    s15/which mods should i do first?

    Hey guys, I really need some good advice I just got a JDM s15 specR silvia done 110kz, all its got is: Greddy Front mounted Intercooler Greddy Electronic boost controller Turbo Timer Full 2.5 Inch exhaust (some bodgy exhaust setup) EVERYTHING ELSE IS STOCK AS A BLOCK OK, so i want to do some...
    • stunny09
    • Thread
    • Replies: 21
    • Forum: S15 Chat
  12. Adam L

    FS: 3'' Samco intake pipe

    I took this off of my GT2871R a couple of months back and I upgraded to a larger turbo and it runs a bigger intake, so I don't need this anymore. It was supplied by APT and on the car when I bought it. I've just had a quick look at cost and both the pipes come to over £60 alone, without the...
  13. Re-VolveR

    re-volver's specR 2002

    hi 2 all again=) here is my previous Silvia(and some photos of new Silvia) http://forum.s15oc.com/showthread.php?3436-Re-VolveR-s-SpecS-2001-5MT-mouse specs: engine: intercooler HKS type-S blow off HKS SSQV TOMEI rocker arm stopper Walbro fuel pump 255L/h Exhaust HKS Hi-POWER Silent 76mm...
  14. Re-VolveR

    how many HP?

    engine specs: intercooler HKS type-S Walbro fuel pump 255L/h greddy 7 spark plug Exhaust HKS Hi-POWER Silent 76mm GREDDY hot pipe AUTOBAHN88 outlet NISMO frontpipe test pipe boost - 0.85bar i don't have dyno in my city(Russia=() please tell me how many HP i have now(approximately) and what i...
  15. E

    OEM Piping Exhaust Size

    hi.. i have been searching through this forum but i havent found one. so better i post. what is the oem piping exhaust pipe from the converter to the catback? 2.5 or 2.75? :D
  16. AllanOrr

    FS: Brand New J Performance SR20DET Screamer Pipe

    Hi guys bought a screamer pipe for my S15 Spec R but due to going for a topmount turbo set up I wont be needing this, its still in the box packed up from J Performance so ready to send soon as Little info on the pipe from the website http://www.jperformance.co.uk/nissan...det-p-234.html They...
  17. Z

    WTB: S15 JDM spec R intercooler pipe

    Chasing the pipe that is after the outlet on the compressor housing on the turbo. not the intake pipe into the turbo. It has a small bend each end and sits to the right of the motor thanks fellas!
  18. B

    Best Dump Style for S15?

    hi there i have a JDM s15 with standard turbo and 3" exhaust from the dump back. i am looking at picking up an aftermarket dump pipe but not sure what design to go, either the open 3" pipe or the split style that splits off the wastegate gasses. i have read a few debates for this so...
  19. C

    FS: S15 3" Stainless Decat Pipe

    S15 Decat pipe - used but looks and works like new. Would look like a mirror if you spend half an hour polishing it! Fitment is perfect and it has stainless flanges. £45 delivered to the UK
  20. crazymat666

    hks ssqv 2 fitting :S

    i just recently got a hks ssqv 2 off ebay new with fittings. but i have a hard pipe kit on the car with no current dump valve. the hard pipe is 75mm but i rang hks and they have a weld on flange for the bov and me and my mate thought this would be the better option as they dont do a t peice big...
17,160Threads
161,105Messages
12,115Members
78winrippLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
105
Total visitors
105
Totals may include hidden visitors.
Top