What's new

pipe

  1. Jay-pan

    HKS recirculation

    Just fitted the kit to my first gen HKS SSQV, but i am not getting any noise at all now. Just like a blow of air, mate had one and still go a chatter. Anything that i have done wrong? set up from my cold intake side, pipe run over to my intake section on the air filter pipe.
  2. CMR

    FS: Blitz Front Pipe

    As above, had a bit of an exhaust swap around this weekend so this is up for sale; Blitz Front Pipe for S15 Been on the car for around 3000 miles, full stainless excellent condition just discoloured because of the heat it's exposed to. Bracket lines up perfectly with the gearbox mount unlike...
  3. S

    Induction pipe work

    So as I'm awaiting my new turbo, I'm going over things that I may need to buy or alter. My current turbo has a 3 in inlet and my new one is a 4 in. Would it be fine to just use a 4 to 3 in coupler or is it best to get a 4 in induction pipe? Obviously getting the coupler would be cheaper, but...
  4. NICKO

    WTB: Brake pipe from master to ABS unit

    Im after the part number for nissan or a second hand jobby as mine appears to be crushed at the master cylinder end that was most probably done when the engine was removed :( the brakes work fine but it needs replacing really. here is a picture link to show you guys what im after, its the top...
  5. Cris69

    WTB: Exhaust car back....

    Exhaust cat back... Looking for or idea's where I can get a exhaust from the cat back!! Current one has seen better days!! Single pipe 4"/5" exit what you got or where is a good place to find one?? Cris
  6. S

    WTB: 740's/555's z32 afm fmic cold pipe

    Hi guys im after all of the above.. 740 or 555 nismo or similar injectors a z32 afm pref genuine one and i need the wiring too and a inlet side (cold) fmic pipe if at all possible with a ssqv flange or just a dv take off cash waiting send info and photo's via pm cheers
  7. Suspect

    Part number help please. Coolant/heater pipe.

    Hi guys, Need a bit of help please. Need a part number for a coolent hose which runs from the water pump to the heater via a metal reducer. the pipe is located above the oil filter. So if someone can jump on nissan fast and help he out that would be great. cheers :thumbs:
  8. Jay-pan

    WTB: Twin down pipe.

    After a twin down pipe the ones that split into two pipes for better clearance. Thanks
  9. V

    Apexi downpipe Jspec?

    Morning all! I'm looking at getting an Apexi decat and down pipe so I end up with a full Apexi system. Here's the down pipe on FR Sport. What does it mean by J spec? I haven't seen that term used for an S15 before...
  10. J

    Turbo System

    Trying to find the cheapest/good quality parts I can for: Braided Turbo Lines Garrett gt2871r High flow manifold 3 inch Down pipe Decat Pipe Preferably all bolt together for easy self installation as I don't have access to a welder. Has anyone shopped around for this before and found any...
  11. S15RKM

    Turbo Drain Pipe

    Im having real trouble getting a new Turbo Oil return pipe, have been to Nissan and there not sure so wont commit to buying it in for me. They gave me 2 numbers the first, 15198-69F00, they say its not available. The second, 15198-75F00, they can get but there not sure its correct and its £23 +...
  12. crazymat666

    Thinking of adding a screamer pipe is it worth it?

    So I went to USC(ultimate street car) this weekend and there was alot of cars popping etc and asked my mate what it was and he said a screamer pipe so I wouldn't giving it a go to see if I like it but isit alot of work is it actually just when you hit the limiter when it pops or isit all the...
  13. DeanS15

    FS: 3" decat pipe

    3" bore Stainless steel decat pipe including new bolts, washers and all metal locking nuts. basically as new, 65+delivery from apex performance. 40-00 delivered :)
  14. paddyb01

    FS: jic coilovers bov and more..

    jic magic coilovers with swift springs says 90 on the back and 100 on the front? went a the back collars today and there free to ajust didnt go near the front 350ono front strut brace 30ono hks bov 45ono timex rev gauge with harness 40 ono gear knob 20ono gear knob 20ono...
  15. Jay-pan

    Japspeed FMIC problem

    Hi, just trying to fit my Japspeed FMIC but came to a problem when trying to fit the breather pipe from the cold intake pipe to the inlet manifold. Anyone got any ideas or help on what i can do?
  16. M

    looking to push 400hp what mods would i need??

    hey guys I'm looking to push 400 - 450Hp out of my 2001 spec S... what mods would be needed?? the car is pretty much stock at the moment with a 3 inch exhaust and dump pipe but thats it.. I was looking at doing it all in one go as i really only want to take it off the road 1 time only.. any...
  17. richy200

    solonoid by the rad, what is it?

    Hi guys, my s15 has a solonoid (looks like a boost solonoid and has boost going to it i think) on the left hand side of the top of the rad (facing the car). There is a pipe that comes from the plenum to this solonid and then it comes out of this solonoid and goes into the carbon canister i...
  18. Mike

    Gizzmo fitting help

    Fitting the gizzmo today, all wired up but getting confused with the plumbing of the solenoid in, sure a few people are running them could help me out. Am i right in saying this pipe connects to the 1 side of it. And this side connects to the 2 side? Or am i WAY off!? Cheers
  19. Curryzz

    FS: Catalyst Converter and down pipe For Sale, Good Condition

    Hi, I have a Cat from my S15 I no longer need as I sold the car, it was removed from the car around 45k. I also have a standard down pipe for sale, also in good condition:) Cat £60.00 plus postage Down Pipe £25.00 postage For some pictures email me or PM me Email...
  20. D

    FS: SR20 T28 top mount manifold set-up £150

    i brought this top mount T28 manifold with down pipe and braided oil/water lines to fit to my s15, but due to a lack of funds and other **** going on at the moment, im going to have to let them go its fits the standard front pipe so would be a straight bolt on. this would be a awesome set up...
17,172Threads
161,126Messages
12,204Members
SharonBellaLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
110
Total visitors
110
Totals may include hidden visitors.
Top