where have you installed your Gauge & controllers?

[jhinchy]

Hi all,
any pictures of where you installed your gauges, controllers etc?
I need to tidy up my dash, theres stuff all over the place, so im looking for some inspiration:thumbs:

 

[kazama]

actually this picture is missing a defi vsd-x mounted near the centre sat nav screen which was installed at a later time.

 

[Nicely]

Slightly out of date photo, but you get the idea...

Defi controller is in the centre cubby (the one your arm rests on)

 

[jhinchy]

I tidied it all up tonight, moved the boost controller and turbo timer to the middle, above them sits 2 Greddy gauges, i also have a nokia kit stuck in beside it. At last, i can see the clock again, until now it was blocked by the boost controller:thumbs:

 

[EMAGDNIM]

actually this picture is missing a defi vsd-x mounted near the centre sat nav screen which was installed at a later time.

WOW there's a lot going on there...

 

[subzero]

^^^ just thinking the same, thats mad looking . nismo cluster FTW !! (your petrol gauge must be wrong - its way too high )

 

[DOM]

Not sure if you want, but you can reduce the number of gauges by using the Defi-Link Display. You should be able to connect this up to your defi link control unit.

I've got oil temp, water temp, fuel pressure, oil pressure, exhaust temp readings via a neat display unit. I also mounted a defi boost and oil pressure on a twin 52mm A pillar pod.

 

[subzero]

whats holding on you PFC .... was thinking of putting mine there as well.

 

[wookieballa]

what kind of cubby is that holding the greddy TT and profec? i just bought those myself an want the install to be as clean as possible.

 

[jhinchy]

The cubby is one from an Opel Astra G, just a normal DIN sized one, i drilled a hole in the back of it for the wires to pass through. Worked perfect.

@Subzero, the commander was held in place by a small metal bracket, folded into shape. It was held in place with double sided tape, and the commander was stuck to that with velcro :thumbs:

 

[Benne]

 

[daniel83]

Here you see both my gauges and the EBC.

 

[subzero]

^^ boast controller is a bit far away from ya tho

 

[daniel83]

^^ boast controller is a bit far away from ya tho

I don´t think soo. You don´t need too look at that when you have an gauge that you can look at.

 

[subzero]

ya sapose , but it is nice to just flick between settings quickly if needed.

 

[daniel83]

ya sapose , but it is nice to just flick between settings quickly if needed.

I only have one setting. 0.8bar

 

[Benne]

I only have one setting. 0.8bar

I thought 0.8 is stock?

 

[daniel83]

I thought 0.8 is stock?

No it´s 0.6.

 

[subzero]

oooh right , i have .6 for going to work , .8 for the wide open cross half way there and 1 bar for general actin the d1 hero .

 

[Andyw]

no gauges, but i have an avcr in a fibreglass pod in the roof, where the reading lights used to be;