wire

  1. Joeh

    S15 Tacho/RPM not working - Strange wire

    Hi all Thank you for taking a moment to read my issue with my car :) My car is currently not registering anything on the RPM gauge/tacho. I have not had a chance to check with an alt-meter if the signal is correct from the ECU as I'm not sure which wiring to check. The car is running a chipped...
  2. Fruitbooter

    Stereo geeks..a little help please (Micra ISO bad earth?)

    Okay went to fit my nice new Sony cd player the other day but couldnt get it to power up.. I purchased a Micra ISO adapter which fits into the sony one nice. However..it wont power up...ive tried switching the red and yellow wire combinations as shown in the instruction manual but with no...
  3. Fruitbooter

    Hub nut wont go on..damaged thread.

    Just put everything back on my car and just my luck..I get to the very last thing the hub nut and it wont go on..:annoyed: Its deffinitly the drive shaft thread as both hub nuts go on the driver side but cant get one on the passenger side shaft. The thread must have got damaged somehow, ive...
  4. A

    after market wheel, need to "hardwire" a Horn, help :O

    right im in a pickle, bought my car with a aftermaket wheel fitted and no horn. today i set of about fitting the horn to a button on the dash, now i just cant find the horn live wire. i've been told its a green black wire but i cant find a green black wire anywhere inside the steering-wheel...
  5. spoonman

    Stock boost soliniod wire....... melted mine help please :)

    This made me laugh when i realized what i had done. so i thought i would take a picture to remind everyone to make sure you plug the thing back in after replacing your turbo gaskets and other crap you do with a turbo. Went for a test run and as normal there was a bit of light smoke coming off...
  6. lvaleiron

    WTB: spec r engine wire loom

    Just as the title says, i'm looking for a Spec R engine wire loom for my car:)
  7. H

    High idle problem

    Over the weekend I installed an alarm on my S15. After the install I started it up and it's idling between 1500-2000rpm even when it's warm. The only thing I tapped into with the alarm was the RPM wire from the ecu for the remote start. I tried disconnecting the RPM wire and there was no...
  8. M

    FS: 4 defi guages and controller2 unit

    hi guys, bought these from a friend of a friend locally, originally fitted in an evo. these were to be fitted to my rx7 but there has been a change of plan and that is being broken down and sold as parts after the new year when its mot runs out, i have a new project on the horizon :) Oil...
  9. T

    Grommit to engine bay for electrical cable

    Hi guys, I'm trying to wire my EBC and stack dash in, but am having trouble finding a grommit to pass through. When i wired my defi gauges and amps up in my s13 there was a nice big grommit on the drivers side to run everything through, but i can't find any such grommit on the 15. If...
  10. LuPix_S15

    ABS On/Off Switch

    Hi guys :) Looking to proceed with switch panel upgrade work so thinking about installing a 20A switch to turn on/off the ABS system (thanks Craig for the switch lol)... however don't want to remove the actual unit as a) haven't got the time and b) not sure if I want to go this far :p...
  11. LuPix_S15

    Guide: Installing Ignition Kill Switch

    Ok folks :) Just thought I'd write up a guide of how to install your very own S15 ignition kill switch. These babies are generally used on motorsport cars which go one step further and have complete electrical kill switches from inside and out to meet racing safety requirements (FIA regs etc)...
  12. koullis

    S15 TPS wiring

    Hey guys, anyone got the wiring for the TPS? If you can include wire colors it will be great. Thanks.
  13. S

    Stereo wire help

    Hi all. I'm looking at changing my headunit, and wondered if anyone knew which colour wires do what? Hear also there is a wire I need to connect to power up the antenna booster? What wire is it? Is it one that is connected to the aerial itself? and what colour wire needs connecting to what...
  14. T

    Question regarding maf sensor???

    I was under the impression that the maf sensor has a wire like element crossing the internal diameter. Well whilst i was doing some working on the car today (yes in the rain :() and had the airbox and maf sensor off i just happened to look through the maf sensor and was suprised not to find such...
  15. A

    speed limit

    Do anyone knows if you can cut a wire so you don't have any speed limit, Sorry for my bad English but I hope you understand, I know that on the skyline you can cut a wire.
  16. F

    Loose wire with plug on the end

    Ok I'm almost finished rebuilding my motor and last night spent over an hour getting the bolt on the back of the head in with the plate and the earth wire for the coils. My question is, what is the other wire for? which bolt on to the same place, it's short with a plug on the end but does not...
  17. A

    Horn Not Working

    Hopefully it's not a hard fix, my horn is not working. When I press the horn you can hear a click in the engine bay. The horns are both connected via a single wire each (the wire is red and black so I'm assuming its power/earth in one)... also looks like it has an oem plug connection on the end...
  18. tooley

    A-pillar guage loom????

    Hey guys, I am fitting a load of gauges tonight and I cant find my multimeter, think I must of lent it to someone. Just a quick question, what wire on the A-pillar electronic boost gauge loom is switched live? So that I can wire up the lights on my other gauges. Sorry in work all day so dont...
  19. LuPix_S15

    Yashio Water Temp HELP!!

    Hi folks :) Either I'm being dumb or summat but the Yashio 'Okachan' Water Temp gauge does not seem to be as straight forward as I thought?! Here's a pic of all the bits I got (this is the version that plugs into the S15 consult etc): The green wire highlighted by the green box is...
  20. V

    ground wire

    alri fellow mebers, can anybody tell me if the metal holder on the ground wire to the battery is nessecary?? its on the wire and is bolted into the battery tray, because after fitting my FMIC i had to turn my battery sideways, and my ground cable just about stretchs and its begging to slip off...
Top