What's new

tomei

  1. Chriscooke

    FS: ***BNIB SR20 260 Tomei PROCAMS***

    BNIB 260 Tomei Procams for solid lifters and the Bent cam sr20det. :) I currently only have the Inlet cam here but the second is on it's way as we speak due to an issue while ordering :) The part numbers for these cams are Inlet: 1433260120 Exhaust: 1436260120 As above the CAMS are BRAND...
  2. I

    Tomei to OEM and power FC tune. should it be?

    Ok iv had my Tomei 256 cams in for about 3 years now with a power FC tune. Iv just done a swap over to the OEM cams but wondering should i expect it to be in a derivable condition? I started it up and it wasn't happy at first, was popping and sorta pre igniting If i give it a bit of throttle...
  3. dave_t

    Blitz Downpipe/Frontpipe

    Before remaping at the end of the month i want to upgrade my turbo elbow and downpipe. a tomei elbow from frsport is coming in at a reasonable price, but a downpipe being much larger is ridiculous when it comes to postage. However I have found a blitz downpipe on ebay in the uk ...
  4. Max

    WTB: someone to weld ali pipes for custom I/C and Tomei Poncam Intake Cam

    Hi, as title really. Putting in a Greddy I/C but upside down for shortest pipework (and it already has mounts for it but no pipes.) Can anyone help, or know of someone who can based in the south of England? I'm in Reading. Also after a Tomei intake Poncam if anyone has one laying about! Got an...
  5. roachey

    FS: My ex race engine parts and extras some new and used

    Hi guy and gals looking to sell all my old and new RB parts from the engine i used last year. Some parts were bought new incase the viper conversion didnt go well so i would have used all these parts. I am looking to sell this all quite quickly as i dont want too many parts still here. I dont...
  6. S

    FS: Tomei Type A Valve Springs & Cylinder Head

    I have for sale a set of brand new unused tomei type a valve springs still in the box. £150 delivered Also got a bare cylinder head, no valves as they were bent but the rest of the head is fine. Not sure how much this is worth so ill try £75 delivered? If you want pictures pm me and I can get...
  7. S

    FS: SR20DE drop in package tomei ecu, hks manifold etc etc

    Up for sale is an sr20de package, out of a ps13, im selling this on behalf of friend, reason for sale is he's going rb. This engine is a very good strong engine, also starts first time every time, the car has alot of history and has been through a few people on driftworks, speaking to previous...
  8. B

    Bobi's 2.2L NITTO STROKER

    Hey all, Im new here, heres my ride ao far :) I bought my s15 on the 1st of Feb 2010 with basic mods - Power fc - Trust intercooler - Blitz Pod Filter - Apexi Avcr - 3" Xforce exhaust with tomei dump pipe - Os giken single plate clutch Power 202rwkw @ 14psi 1/4 mile: 13.2 @ 105mph( i think)...
  9. lvaleiron

    lvaleiron's "Reborn" Fire Red S15

    Hey guys! It's about time i post my ride... i've been a member of the forum for a while now, so here it goes! 1999 Spec S with all the Spec R bracings and HID front lights (maybe autech version, dunno:confused:) Originally Pewter Grey Body: Chargespeed Type 2 Front Bumper 57" GT Carbon Fiber...
  10. J

    new from tipp (ireland) :)

    hi all im jamie just got myself a turbo s15 a few weeks ago.. finally got a chance to take a few pics and heres some spec :) iv big plans for this 99 gunmetal grey engine 120k vvt s15 engine apexi power fc thrust td06 20g thrust external wastegate thrust top mount manifold split fire...
  11. S

    FS: Tomei Procam Camshafts In 270° Ex 270° Lash type

    Got for sale my tomei cams. They are the lash type tomei procams 270° inlet and exhaust cams. My plans have changed thats why these are for sale. Brand new in the box, never been used, Duration (degree): 270° Max Cam Lift(mm): 12.50 Max Valve lift(mm): 8.0 Lobe Center Angle (initial): Intake...
  12. N

    Tomei Metal head gasket SR20DET Brand new

    Tomei metal head gasket SR20DET 88.0-1.5mm Location-Malaysia Price-RM1100 Nakamaproshop Kinson mobile=+60164117720
  13. 7

    Wanted lists

    1999 Nissan Silvia S15 Spec-R..:rotfl: Interior: Sparco Naxos Steering Wheel Moonface Titan Shift Knob Sparco Torino 2 seats LED Dome Lights white Exterior: Crystal Smoked Side indicators Nissan OEM Tinted wind visors Chargespeed Carbon Trunk Ganador Super Mirror blue lense ORIGIN Rear Lip...
    • 7Steve77
    • Thread
    • Replies: 0
    • Forum: S15 Chat
  14. Shawnhalu

    FS: Parts for Sales

    Selling off to any parts of the world :) some brand new parts that i never been able to use it but did opened that package before. (New items is all on a 15% discount) Tomei Valve Guide - USD $280.50 Tomei Bery-Rings Seat - USD $382.50 Tomei N2 Oil Block - USD $153.00 APP Stainless Brakelines...
  15. Fasthands

    Nismo R-tune Spec R,

    Well folk's here she is now in my hands.:nod::) I have been busy fitting the following parts and all is going well so far..I can't lower the suspension any more as it's at its lowest on the front, and hardly any thread left on the rears. Shame as a little lower would have looked spot...
  16. M

    Re-introduce (Moving to Melbourne)

    Hi i'm Michael Theo. A Visual Effects Designer & student. I owned this baby S15 for almost 2 years. I bought a stock standard reckon 2002 Spec R. I'm moving to Melbourne on 17th of Febuary 2011 for my Master degree in Film & Video @ Deakin University. I hope someone could lead me to the...
  17. Aurora61

    Aurora61's S15 in Japan (with new Tomei M7960 Turbo)

    When I first found this forum, I had a different s15 spec R. Long story short, my friend crashed it driving on one of the mountain passes here in japan. I bought a new one soon after, so im finally posting pics of it after months of modifying. My old S15: New S15: Exterior -Origin...
  18. D

    FS: Sr20det tomei con rods and acl forged pistons

    hey guys i have a set of forged TOMEI con rods with ARP studs and forged ACL racing pistons, they are used but with less then 1k miles on them and they are like new. if you would like to see some pics they are on the driftworks forum which a helpfull person put up for me,:wack: if you would like...
  19. C

    Tomei stage 1 Ecu, is it safe to run?

    I got my hands one a stage 1(d-1) Tomei Ecu, and was intended to plug and play and see how it goes but after a chat with a few guys, my concern is the ecu will be tuned to different fuel (100 octane fuel in japan) and along with different climate levels it shouldn't be advise to put it in...
  20. J

    One very tough JDM S15

    Hey people, I thought I would put up my pride and joy to show everyone and see what you all think of it. Its a 1999 Nissan JDM Silvia S15 ENGINE: Bored, honed, machined and chem cleaned block Fully balanced bottom end Ross harmonic balancer Crack tested and chem cleaned crank ACL race...
17,177Threads
161,142Messages
12,292Members
k1rby180sxLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
4
Guests online
86
Total visitors
90
Totals may include hidden visitors.
Top