What's new

reading

  1. S15_SAM

    Soon to be my new car!!! S15 yellow!

    So I've recently sold my supra! And and S15 has been my dream for years so I've put a deposit down on this beauty! So I go to pick her up soon, and I can't wait! Been reading about g-box failures alot lately so just brickin it about that, but we will have to wait and see! :)
  2. C

    Knock sensor reading

    Out of interest what should this be at - or more importantly what should this not go above? I know the theory behind the information but not sure what exact figure I should be comparing the sensor reading to?
  3. sliding-r

    s14a kaaz 2 way into s15 casing

    hi, I am about to acquire a kaaz 2 way from a s14a, want to check before i collect that it will fit.. from doing some reading i have learnt that i will need the output shafts from a s14a.. will there be any other implications?? Thanks :)
  4. J

    boost guage not reading

    Guys just a quick one (i have searched but cant find a location! :p) My factory boost guage has stopped working. Flicks up when the ignition and engine is switched on but just sits at 0 and wont move. Guessing its the pipe to the guage but i must be being thick as i cant seem to see it! :wack...
  5. tooley

    Oil Pressure guage.

    It seems to be reading backwards!!!! Its wired correctly. ive used my old sender not the one from the new gauge so im assuming that might be it. it could be reading a different resistence value. Guess ill have to put the new sender on. Anyone come accross this before?.
  6. C1TPT

    HKS Type 1 Turbo Timer

    Hi guys, I bought an HKS Type 1 Turbo Timer a while back, fitted it fine but it kept reading the wrong speed and therefore mucking up all the other features it has over the Type 0 timer. After a while I realised it was reading KMH as MPH an vice-versa! I got the speedo signal wire straight...
  7. S15AK

    Greedy Profec B-spec II (help)

    I have the above boost controller in the S15, I've downloaded the user guide but I still haven't got a clue. I'm happy to leave it alone, as I don't want to start playing about with boost. The only thing I want to know now is the display. When I first got the car the reading use to shoot from 0...
  8. subzero

    Knock reading on your PFC ??

    what kinda numbers are you reading on your Power FC ... ive been keeping an eye on mine as of late after ever spin , just seeing what its max reading shows at .... just today it hit 17 ?? dunno if thats good or bad , just thought it was good to get some feedback from a few others. bearing in...
  9. subzero

    oil pressure ??

    have the gauges fitted but the oil pressure seems high ( up at 6) what should it be reading ??
  10. mint

    Decat pipe.. will i need a controller!?

    Morning all, got me a Decat pipe from Bon over at Driftworks, Iv been reading up that with the install of the decat that the boost creeps up. Im running OEM boost at the moment with FMIC and ARC intake, No bov and an HKS system. Will i need anything else to run this ok?? As iv been reading...
  11. S

    Another Drunken Aussie

    Hi All Brendan here from Sydney Just thought i'd drop in here and see what's going on :) Seem like a great bunch of people who know what a good car is :P I drive a 2002 200sx and when im done here i'll probably find a members ride section or something Thanks for reading! :thumbs:
  12. I

    New Australian member

    Hi thought id introduce myself. My names Alex, just bought my first s15 a week ago. Loving it. Definitely a good choice. Dont know what i plan to do to it atm, but enjoying reading about the stuff everyone else has done to theirs on here, heaps of inspiration :thumbs:
  13. sands

    not so new newbie irl

    hi everyone, not so new newbie hear richard from co kilkenny ireland. s15 sper r owner since last may bout the last time i had any money to cant stop myself buying for the car since got it. on hear since bout april mostly just searching and reading up on anything needed to know dunno what...
  14. L

    PFC knock reading

    This is realy annoied...my pfc's knock reading quite high since first dyno tuned. I went back to see tuner (twice)and get it retuned (like pull the timing back, mixture...etc) but won't help. The knock reading has gone to 79 in 2nd gear 5700rpm (water temp is 82c)and most of time when i boosted...
  15. Z

    one off high knock reading

    the other morning on my way to work, after driving on the highway for 20 mins i came off the highway drove at speed limit (60 km/h) for 5 mins then was heading back onto the highway so put my foot down reached 6700 rpm and noticed my engine light flash once, checked my knock reading and it was...
  16. J

    "0" Boost Reading

    Guys, I have this issue:- The boost reading is at 0 when i turn on the ignition and stays there when driving/flooring. It doesnt gauge anything although spooling/turbo sound is normal. The needle then points at -5 when ignition is turned off. I've read in the forums that it could be the...
  17. L

    boost gauge reading incorrect

    Bought a greddy boost gauge a while ago. But it was fine until I fitted the gauge on my car and took off it again. Now it's reading like pic. It is a mechancial boost guage. I've no idea how to fix this problem. :eek: Thanks
  18. S

    oil pressure reading for s15

    dear guys, Just wondering what is the normal oil pressure reading for s15? mine is: after engine had warm up(oil temp 80deg) = 200 - 225 kpa / 2.25 bar at 800 to 900 rpm idling. Is this consider normal? ** im using defi oil press meter kindly share your oil pressure reading if you have one :)
    • silvialam
    • Thread
    • Replies: 4
    • Forum: S15 Chat
  19. P

    Hi All!! Newbie reported!

    Have registered in the Forum for quite sometime but haven't posted any messeges. I'm another S15 owner from Malaysia. I'm driving JDM Spec-S 2001 with INGS Kit. Been reading a lot of useful info here. It's really a great site!! cheers for the moderators!
  20. R

    Wrong reading or dangerous?

    Hey guys as posted on NS.com What are your opinions? I don't have an aftermarket FMIC or boost controller..just a Filter and Turbo back Exhaust..is the reading from the boost gauge wrong..or is it right and I should be worried about overheating as im only running the standard FMIC?? Just...
    • RyanNK
    • Thread
    • Replies: 2
    • Forum: S15 Chat
17,172Threads
161,126Messages
12,219Members
xoso333lifeLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
89
Total visitors
89
Totals may include hidden visitors.
Top