What's new

nuts

  1. S15_SAM

    Front wheel/hub studs and wheel nut problems. Need help

    Basically I picked my s15 up last week and the PERSON who had it before me obviously couldn't do the wheel nuts up properly, they were ultralight wheel nuts (it has ultralight wheels too) and they are cross threaded and basically buggered. I want to replace the studs with longer ones so I can...
  2. pegliobaglio

    FS: 25mm spacers (non hubcentric)

    Hi guys, found these when having a clear out, have swapped for 15mm now so don't need these anymore. Selling them with all the nuts included to fit them Will get some pics up this evening,looking for 60 quid posted in the uk o.n.o
  3. S

    Fancy some camber?

    This is nuts!!!!! Must watch. http://www.youtube.com/watch?v=_r6ltUgtFWI&feature=youtube_gdata_player
    • S15 SILVIA
    • Thread
    • Replies: 2
    • Forum: S15 Chat
  4. W

    FS: work 'skid rims', work nuts, spacers cheap!

    These rims have come off my s15, all have kerb rash and all really could do with a refurb. No buckles or huge dents to stop them being true, all i do know is that they need rebalancing as above 70mph they gave slight wobble through the steering wheel. If im honest i have never driven the car...
  5. C

    Rays Volk formula lug nuts

    Hey guys just another offer from our end for this community. At the end of this month we are shipping some wheels from Rays. We are able to put into the boxes some formula nuts so by this way shipping from the factory is free. Also as an offer you can have the nuts for 170 pounds including...
  6. tooley

    FS: Brand New D1spec Wheel nuts

    I cant fit these on with my Advans as it stops me gettin a tool on i need female type nuts. So brand new not used 20 x Blue D1 spec ally wheel nuts. £35 inc delivery. 07966083427
  7. sliding-r

    FS: NEW Blue anodised wheel nuts

    Hi, Blue D1 Spec nuts brand new up for grabs: £35 inc. delivery!! BARGAIN!:thumbs: 20 x Nuts still in box in 12 x 1.5mm so fit all nissan.
  8. B

    veilside 18

    i want to refurbish my veilside 18 3piece alloys.i have takin the tyre off and is not welded, so was jst woundering are the nuts torqued?????:confused::confused:
    • brianjj14
    • Thread
    • Replies: 0
    • Forum: S15 Chat
  9. Darren_S15

    FS: S14/S15/ OilFilter/WheelNuts/Actuator/AirBox/Exhaust/Hoses/FogLights/Brakes/CatchCan

    Having a bit of a garage clear out in order to make some room. All parts are located in South Essex and prices are negotiable :nod:. Postage would be standard Royal Mail, but happy to use alternative if required. Any questions just ask. R33 Skyline Blue Print Oil Filter NEW Got this free...
  10. LuPix_S15

    FS: Ultralite D1 (Bronze) 17 x 8JJ

    Ok folks, Since I've upgraded to Rota GTR's recently, I'm selling up my last set of rims: Ultralite D1 in bronze 17 x 8JJ +32 all round. Fitment 5x114.3 PCD. Excellent condition - had them on the Silvia for just under 2 years and washed them pretty much every week as I'm a clean freak lol...
  11. DeanS15

    FS: 17" enkei RC5 bronze alloys with near new fk452's

    as above, these are the wheels that came off my car. very rare genuine bronze enkei racingline rc5 jdm wheels, very lightweight hollow spoke design with next to new (hardly any wear) falken fk452 tyres all round. rears are et42 9j with 235/40/17 tyres and fronts are et35 8j with 215/45/17...
  12. Curryzz

    HELP my drift wheels dont seem to fit rite?

    hello people,iv just brought a set of standard s14 wheels to put on the rear to get a bit of drifting on the go, they seem to go on fine and it drove ok but on the motorway and every now an then it will woble slightly when on the power, i have fitted them using my works lightwieght wheel nuts so...
  13. S15AK

    Wheel locking nuts (Black)

    Hi guys, Ok I need some wheel locking nuts, and not sure what to go for, I'm prepared to spend a few quid on them as I know cheap ones can be a nightmare. I need them to be black though, any recommendations would be good thanks..
  14. V

    admitting defeat :(

    hey lads, my gasket between the turbo and the mani decided to blow during the week, its taking all the joy out of driving my beloved 15, i went at it today and i was soo close but yet soo far..... i had the down pipe out, all the heat sheilds one of the lines to the turbo, when i noticed it...
  15. F

    Wheel nut fittment

    Ok a question for all you wise ones out there. I have a set of Evo VII wheels for doing track comp's, they use fitted shank nuts with a flat face not tapered fit. So does anyone know what the fit should be between the wheel and the nut. What I have got at the moment is wheels with 19mm ID...
  16. S

    FS: Pearl White Aero SpecR

    It's time to sell up and think about my future so my SpecR is up for sale. My passion is for mint cars rather than heavily modified therefore mine is in pristine condition. Originally imported last year by Torque-GT as a grade 4, it has only covered an extra 6k miles and has been serviced twice...
  17. Darren_S15

    Exhaust Manifold Stud Problem

    OK so Im going to be removing my turbo this weekend to fit braided hoses. Earlier this evening I removed the nuts off my manifold after they had soaked in WD40 for over a day. Two of the studs have come out with them though. Now this is the weird bit, both stud have different threads on...
  18. sushiming

    Changing S15 Front Brake Pads

    I need to replace them so i thought i would be nice and sort out a brake pad changing write up at the same time for the people that havent done it before so here we go...... Tools you will need Jack, Screwdriver flat bed one, clamp, copper grease, First un do the wheel nuts before jacking up...
  19. Darren_S15

    Flaking wheel paint

    Ok Ive never got myself a new set of wheels before and Im not sure if this is normal? I fitted my new rear coilovers today and put the new wheels on for the first time. I had to then readjust the ride height on the coilovers and so I needed to take the wheels off again. When I did this some...
  20. Darren_S15

    Alignment Arm Fitting

    Wanted to get people opinions on this really. Im going to be replacing my alignment arms in the next few weeks and am unsure if I should be replacing the nuts and bolts that I will be undoing. Ive found a few threads on the SXOC and people generally dont seem to bothered about reusing the old...
17,172Threads
161,126Messages
12,211Members
UnsextskerenoLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
98
Total visitors
98
Totals may include hidden visitors.
Top