head

  1. LuPix_S15

    Nurburgring Trip - This Weekend!!

    Hey guys, Just thought I'd post up a thread before I head off to Nurburgring for the first time this weekend. I'm going with some mates I've know for a few years from Streetrace modified cars forum and there's a chap who used to run a Ring trip business who's taking us there and back etc :)...
  2. S.K

    Video or car on dyno (lots of torque)

    Mapped by Steve @ Fc Tuning You know when he has done a good job when you break the straps on the dyno Engine has standard internals with a steel head gasket and bolt on mods only.It has a blowing mani to turbo gasket on the video below but is now fixed,
  3. crazymat666

    cd player does sub leads fit?

    i have the standard cd/cassette player in the spec r and i was wondering if i put my sub in the back would the leads plug staight in the back of the unit or not? or would it be worth just buying a new head unit
  4. D

    VE cams into DE head

    Hi guys, please do forgive me if the question sounds retarded, but can it be done? is it worth it? TQ
  5. spoonman

    What to do with a cat.

    What to do with a cat. ( a bit of a laugh ) I found this on nissansilvia.com and thought i was rather good. These guys were discussing about what you do when your cat collapses get a highflow or hollow it out, then one classic came up with the following. rowstar, on 18 February 2010 - 11:11...
  6. sliding-r

    Paint code- Pearl white

    Easy one for someone probably, i know where you find the code on the plate on bulk head but dont know which number it is, anyone know the code for pearl white?
  7. LuPix_S15

    Cabin Filter

    Hi fellas, Anyone able to tell me if there's a cabin/pollen filter I can get to and change in the S15?? Things get a bit smelly sometimes and it's not been done since I've had the car (2.5 years now)... Also, I've been told the windscreen can mist up badly due to a dirty filter and with...
  8. roachey

    FS: SR20DET and parts

    i am selling an sr20det engine. The engine is in need of some work as it has bad compression but through some checking it appears that the rockers and the shims that hold the rockers to the springs were not installed properly by the previous owner!!! The head has been stipped down for veiwing if...
  9. Topper

    Part number request

    Guys, hoping one of you can assist. Need the part number of the the sub-headbolt located inside the head, but ahead of the timing chain (front edge). There are two bolts, presume they are the same, with a large collar from the head to the threads. Cheers :thumbs:
  10. G

    estimated power output?

    car finally gets tuned this month just wanted to see what figures anyone thinks ill get?, im going with 220-230 kw at the wheels with the current engine mods, k&n appolo cold air intake/pod thingo hks hard piping intake kit greddy hot pipe greddy m spec front mount kit spitfire coil packs...
  11. Curryzz

    Sterio info:)

    Hi people! I havnt picked up my 15 yet it's coming in next week, I brought a alpine single din head unit to play my iPod on witch was in my civic, will this fit in a 15?cheers Paul
  12. S

    help radio trouble

    help radio hasn't worked since i bought the car two weeks ago fuse was gone so replaced it an it blue strait away. to find out if was anything else on same fuse causing the problem ran fused wire strait from battery to back of head unit an still blue instantly. any of you guys got any ideas or...
  13. naha_music

    sr20det head comparision

    I'm trying to get some info cleared up. I was sourcing a head for my s15 to use for a build up. I came across a s13 'blacktop' head in decent condition for a decent price. I asked around and was told that the s13 head is compatible to the s15 block so i went ahead and made the purchase. Now...
  14. J

    what bph should i be getting with this setup??

    greddy t518z turbo z32 afm 555cc inj tomei cams manifold elbow downpipe boost controller 1.2mm metal head gasket uprated fuel pump what bhp should i hit with these mods
  15. Topper

    Head Gasket change

    Looks like i'm going to have to change my head gasket. Has anyone done this before? Looks a big job.. Head gasket is the gasket on the left of this picture (11044): Have had a look on the service manual, but cant find any details. Only details on complete removal of every part. Is this...
  16. seilow

    hole in cylinder head utility??

    hi guy ^^ someone know what it this hole ? many thanks
  17. Hunts15

    FS: vented fenders for sale

    unfortunately and raged iv to sell these but due to that stupid dog and me clipping a wall have to sell up to afford the 400 euro for the head lamp :( gutted :annoyed: lookin for offers in and around 290 as they are brand new and gel coated..
  18. V

    tightness torques?

    hey lads need your help A.S.A.P one of my mates has to take the head off his sr20 (redtop) its an s13, does anybody hav the tightness torques for re-tightening the head bolts and tensioner? and any other help associated with this job will be greatly appreciated thanks dave
  19. naha_music

    how do you pressurize the combustion chamber?

    i've got new valve springs and retainers that i'll be installing in the near future and was told that i need to pressurize the combustion chamber if i'm going to be doing the work while the head is still on the motor. how is this done? any help would be greatly appriciated!
Top