As the title suggests really,am toying with the idea of swapping my diff for a skyline diff with a 4.1 ratio to get better acceleration as the gearing seems to drag forever in my car 3.9!!
Anyone done the swap,any info on it? I know I will lose some top end but really don't think I will miss it...
looking for some advice you lot......if anyone has experience with them and doesnt mind sharing :)
basically i used to have the redline mtl gear oil in my box and didn't notice any more slickness to gear changes or anything, i've since drained it and am now considering going back to a semi...
Hi guys as some of you may know my car has had a few running issues from the moment it came into the country, and ive actually done 63miles in it within the last 6 months, as the respray and prep took a little longer.
But anyway im now ready to get the boosting issues sorted but need to know...
I'm 100% sure my 3rd / 4th gear circlip has let go. There is talk some people weld the gear in place vs regrooving and fitting a larger circlip. Has anyone had experience with either method?
This is just a basic guide for those who don't know how to do it on how to overfill the gearbox, beyond the filler plug on the box itself. It was new to me so i guess it'l be new to some of the newer owners aswell :)
Firstly, jump inside your car and eye up the gear stick:
Remove the gear...
Hi,
I recently got a '99 Silvia and it has been giving me a few problems that I have to get fixed.
When the car is cold I cannot get into any gear without the engine stalling. That's been getting worse each time. It seems as if I'm trying to get the car into gear with the clutch only half...
i was out the other night and gave her a hard time and noticed through 1st and 2nd gear if i revved it all the way (not to the limiter) the oil light flicked on then changed gear to 2nd and it came on again then to 3rd and it didnt come on so i paniced abit and went home left it all night to...
Hi!
recently i have a problem pushing into gear during cold start. You push the gear to gear 1 or R position it just cannot go in. same goes for all the other gears.
After much trying, it finally goes in, usually i try to engage 2nd first and use some force to get to first.
i tried pumping...
hey guys ive been tracking for a while now only running on tein flex's and they started to leak just recently.
Ive been looking into the hole cheap coil over set up and have read lots of good things about the following kit http://www.meganracing.com/product_detail.asp?prodid=44&catid=32
megan...
Hey guys.
Well my S15's VTC gear rattle is getting very bad now, so I've decided to pick up some adjustable cam gears and chuck them in. But before I attempt to do the installation myself, I thought I'd post some questions for the experts here. I've had a read through the TIMING CHAIN...
Hi,
I'm just wondering if any one out there with one fitted has experienced any problems with it or with it cause any damage to the gear box it self?
Thanks
Ian
Strange equest but when I had my alarm fitted the chap broke the plasic bit that the gear gaitor wraps around, just wodnered if anyone had one on a S15 they were braking?
Also a de-cat pipe/kit?
For sale s15 gear box
Just re built by GDA motor sport in kent, used for one track day and now started jumping out off 3ed again,
offers around £150
Many thanks
Steve
077722 76357
Right so since i got the car every now and then the car makes a ticking noise when idling, then when you put it in gear and goto drive it for a slight second it sounds like its crunching like its not in gear.
it sounds like its coming from the head somewhere?
anyone had this problem before?
yes once again another vct problem just after a part number for the vct cam gear its self so i can replace it n get rid of the TDI sound lol any help would be greatfull
Just wanted to big up Lex @ Ace Image UK for carbon vinyl wrapping my centre console :thumbs:
Cheers mate it really does look awesome!! Noticed the material is pretty thick in relation to normal stickers cos the shift pattern and gear number grooves at the bottom end of the gear...