gasket

  1. miniorochi

    Gasket Kit

    Hi All Justy wondering if anyone knows where I can get a full engine gasket kit for 15 SR20DET. I'm assuming gasket Kits for s14s SR 20DETs will also fit? Thanks for the help
  2. Darren_S15

    FS: Bottom Draw Clear Out - Some Nice Goodies

    Had a clear out of the bottom draw of the tool chest today and found some bits to sell, plus some bits that clearly were not in a draw! This listing contains the following items, see below for more details: Apex Performance Catch Tank Aluminium Spark Plug Cover Works Emotions Valves - Red...
  3. JaseYpk

    Oil Sump issues?

    Ok so ive got a slight oil leak which has just started. well, actually i've got two. ones on the bottom pipe on the turbo but that should be a simple fix. the other is 'i think' the oil sump.. If i were to drain the oil, and unbolt the sump, is anything going to fall out and be a pain in the...
  4. spoonman

    Oil leak through bolts,

    Ive had a oil leak for a while now and have replaced the crank seal twice thinking it was that, but after giving it another degrease i watched it on the first start up since and noticed oil and a few small bubbles coming out from around the bolts. i thought it might of been the where the bolts...
  5. N

    Sr20det noisey head

    My sr20 ever since the head gasket was replaced has a slight ticking that is inconsistently there, I have bleed my lifters and that never helped any ideas? There are no leaks from the gasket, will try get a video up shortly
  6. N

    s15 using water

    Hey guys I've noticed my silvia is using water, the radiator is down just a little from the top, it is turboed and was wondering where it could be going? the head gasket has been replaced with a stainless head gasket
  7. JaseYpk

    Another bad idea, courtesy of Jase

    Ok, so this weeks bad idea, is to remove the exhaust gasket at the front of the cat, as it was rotten, and not bother putting a new one in 'for the mean time' End result - me sitting at traffic lights coughing and spluttering from the cabin filling with exhaust gasses. haha. top tip - always...
  8. ichigo-300

    Oil Pump cover torque settings?

    I've bought a new Timing Chain Cover/Oil Pump assembly as part of a new engine build i'm doing and I want to remove the oil pump gears to have a metal treatment done (WPC) I'd like to know if anyone knows what torque the bolts should be tightened to and if the pump cover needs a gasket or...
  9. vengee*

    WTB: turbo to manifold gasket

    Hi! as above, Im searchin for new oem turbo exhaust manifold gasket. The old one has blown out. many thanks
  10. N

    Tomei Metal head gasket SR20DET Brand new

    Tomei metal head gasket SR20DET 88.0-1.5mm Location-Malaysia Price-RM1100 Nakamaproshop Kinson mobile=+60164117720
  11. rudd-o

    Head Gasket Help

    Guys i need your help I send my engine for rebuild and now im looking to buy a head gasket. The mechanic suggest a Commetic 87x1,3mm But i heard from many people that cometic gaskets are not reliable. The pistons i have are forged CP 9.0:1 @ 86.5mm If you have something to suggest me it...
  12. T

    Rebuild time...

    Well as you may have read, the first few months of my S15 ownership has been somewhat sour, however I am still very enthuseatic about the car and its future so.. Engine is full out, head has been taken to my machineist who is going to give it a skim to bring back to life. The arse end of the...
  13. S.K

    Video or car on dyno (lots of torque)

    Mapped by Steve @ Fc Tuning You know when he has done a good job when you break the straps on the dyno Engine has standard internals with a steel head gasket and bolt on mods only.It has a blowing mani to turbo gasket on the video below but is now fixed,
  14. J

    gasket damaged turbo?

    Been working on the car today on my driveway in the rain, snow and cold :wack: got the japspeed downpipe and decat on (the bracket on the downpipe is laughable!!). Anyway onto my dilema... i got the mani, turbo and elbow out and found the gasket looking like this... The fan wouldnt spin by...
  15. DOM

    FS: Trackday - Curborough Sprint Track - Tuesday 1st Sept

    just blown my turbo to manifold gasket and can't seem to find a replacement T3 gasket in time for Tuesdays trackday. Location.. It is in the Fradley area of Staffordshire.. The tracktime cost me £42, and looking to get some money back so selling for £20 Here is the link to the thread with...
  16. DOM

    WTB: T3 turbo gasket

    Has anyone have a spare (new) T3 turbo to manifold gasket. Just blown mine and have a trackday this Tuesday. Willing to collect within 30 mile radius of Milton Keynes. PM me if you have one available
  17. LuPix_S15

    DW (Japspeed) Turbo Elbow

    Ok guys - just been swearing a bit tonight cos over the past few weeks the exhaust mani area has been blowing like Paris Hilton in a dodgy hotel lol... I was convinced the head/mani gasket was gone as I could see carbon deposits around the third and fourth port etc. However, just spent 2.5...
  18. V

    diff leak

    hey guys, i done my first trackday today and my diff sprung a leak, it was always kind of leaking a bit but never too serious, but today it got worse it was actually dripping :( what i dont no is exactly where its leaking, its either the diff casing or the driver side output shaft, what i want...
  19. Topper

    Head Gasket change

    Looks like i'm going to have to change my head gasket. Has anyone done this before? Looks a big job.. Head gasket is the gasket on the left of this picture (11044): Have had a look on the service manual, but cant find any details. Only details on complete removal of every part. Is this...
  20. C1TPT

    Turbo gasket on back order! :(

    Hi guys, I'm trying to get my car sorted but Nissan have put the turbo to manifold gasket on back order and I cant get hold of one for 4 weeks! I've had a search on the net and found one on driftworks: http://www.driftworks.com/catalog/products/turbo-to-manifold-gasket-s13s14.html Assuming...
Top