fitting

  1. M

    FS: sytec fuel pump

    I have a sytec (walbro 255) fuel pump for sale,brand new in box,never got round to fitting it to the car...looking for 60 euro..
  2. Havoc

    Help with Fitting a new clutch

    Unfortunatly my clutch went so i had to order a new one. I ordered an exeedy organic but apon ordering it i was informed that if i dont get a new flywheel i will have to get the old one shimmed befor fitting it or it will just kill of my new one? Is this correct or can anyone shed any light on...
  3. B

    fitting HID (oem) to a non Hid s15

    hi...did anyone ever fitting oem xenon hid headlights from a s15 to a s15 with non hid headlights? i heard i wouldn´t fit plug and play. i´m sure its because the xenon leveler (hope its the right word). so...how i could fitting them?
  4. DeanS15

    anyone fitted proper 'aerocatches' neatly to a standard bonnet??

    at speed the drivers side of my bonnet has always had air get under it and its always bothered me - on my last car, an fto, i always planned on fitting them with my carbon bonnet and never got round to it. anyway, being a fairly cheap modification and being bored i thought i'd get round to...
  5. Aurora61

    will 235/50/18 tires fit?

    I bought a set of wheels that came with tires (18x8.5 +35 with 235/50/18 front and rear). I knew from my previous set of 18's that ill have trouble fitting a 50 profile tire on the fronts, so i bought 2 tires in 225/40/18's. However, seeing how the rear fenders are deeper (plus, my fenders are...
  6. T

    BOV fitting

    Next on the list, I currently have what I belive id the pigeon mod, and whilst the sound is great, I understand to hit the 1.2-3 bar stage 2a requires, it will not suffice. Has anyone seen a decent "how to" for fitting a BOV? do you normally get a hard pipe as part of a kit for this? I have...
  7. T

    High Idle - not by much though

    This is causing me greif with the MOT man. The car idles at 1050-1100rpm and 1050 is the top limit. I belive the car should be closer to 900-1000. Car has a turbo back exhuast, currently with a Decat, although I am fitting the cat this weekend, perhaps that may help the situation? Is...
  8. Dan H

    Fitting a GReddy elbow

    I've been upgrading my exhaust today, starting out fitting a GReddy turbo elbow, but have come up against some problems. The Greddy elbow has got a divider running inside it, which also pokes out of the end of it. The turbo has also got a divider between the wastegate and the compressor wheel...
  9. M

    tyre fitting in dublin????

    anyone know of a good place to get my rear tyres fitted??they are 235 tyres to be fitted on 10 inch wide rim so wanted to know of any places in dublin that have experience in fitting stretched tyres..
  10. sliding-r

    fitting Recaros to the 15

    Hi, im thinking in a while when i can afford fitting a set of DC5 seats, is it just a case of differnt rails to fit them in the S15. I have seen a red s15 with ek9 seats in the past but fancy the integra seats as they will be newer. Cheers, Tom
  11. C

    Tomei Poncams

    Would there be any advantage to fitting a set of Poncams to a mildly tuned SR20 running a GT28 at 1.3bar? And would another remap be required if fitting them? :D
  12. R

    boss kit/steering wheel

    hi just got my omp steering wheel and d1 quick release just want to know if any nissan boss kit will fit my s15?? and i will be fitting this tomorow so a step by step guide would be great if any one could help please thanks:nod:
  13. C

    EBC fitting..

    When fitting an EBC do you have to remove or block up this sensor...? Also what is it/what does it do? I've removed the boost solenoid on the LH strut, but this is on the RH strut. :)
  14. LuPix_S15

    Fitting Tein Coilovers

    Hi folks, Just wanted some quick guidance on fitting Tein Super Street coilovers to my 15 over the stock suspension :) Is there anything to particularly watch out for when doing the swap? I'll be doing this job with a mate who's fitted Tein SS to his Evo 6 recently so should be in good hands...
  15. JonoS15

    oil catch tank fitting

    hi everyone, just wondered if anyone knew where i could find some instructions for fitting of a catch tank. i know its pretty easy but i just wanna make sure i get it right. :( cheers jono
  16. P

    THS Elbow Fitting

    I'm fitting a THS elbow and downpipe this weekend in situ. What puzzles me is that the fitting kit includes: - 3x M10 Studs - 2x M8 Studs with washers And some other bits which are fine. BUT, I thought the turbo to elbow studs were all M8? Or is my memory playing tricks. I dont want to...
  17. W

    Fitting Braided turbo lines

    Hi guys, Ive just purchased a earls braided line set for the oil and coolant lines for the turbo. Has anyone got pics of them installed on there car. IM running stock manifold/turbo. Having trouble fitting the coolant line at the front of the turbo, does the 90deg bends go to the block or the...
  18. D

    Need help fitting intercooler

    I recently bought an intercooler which came from japan. Its an xs power one and the fitting instructions were not in the box. Has any1 fitted one before or does any1 know where i would get fitting instructions. Any help would be appreciated
  19. DeanS15

    new fuel pump

    i just recieved my 255ltr/h fuel pump from horsham developments and cant believe how tiny they are - from pictures i'd seen i was expecting it to be about the size of a beer can but its weeny! i've looked at nicelys guide and it looks pretty straight forward - are there any other precautions...
  20. D

    Need help fitting gauges

    Anybody know which boost/oil pressure gauges fit in the 3 air vents in the center console in the nissan silvia s15.. Also if anyone has any advice on fitting them it would be much appreciated.. thanks
Top