engine

  1. dave_t

    Engine Cooling - Cooler Temperature Thermostat?

    Heading to the Nurburgring in May and i'm in the middle of prepping the S15. With just the usual bolt on's, with the standard turbo: Tomei Manifold (Heat Wrapped) Tomei Elbow (Heat Wrapped) Blitz Downpipe (Heat Wrapped) Tanabe Hyper Medalion HDI GT2 FMIC Apex Intake Pipe Apexi Filter Apexi...
  2. C

    Will an Almera ECU fit an S14 sr20

    Does anyone know if an Almera ECU will work on a S14 SR20DE engine as I have the engine but cant find an ECU or harness? Paul
  3. S

    WTB: S14 and S15 Wiring

    So I spoke with a guy that did an SR20DET swap from an S14 into an S15 (similar setup to my car), and he told me how he got the speedometer working. He had to take the engine loom out of the S15s wiring and solder in the S14s. The S15s loom consists of engine, ABS, and Auxillary, whereas the...
  4. spoonman

    Wanting to install a larger intercooler? This is what not to do

    If you are new to modifying turbo charged engine, this is a rather bad idea.
  5. S

    Speedometer and heater issues.......

    I just picked up my S15 last night and was aware of a couple issues prior to purchasing. This has pretty much been copy and pasted from another forum, but haven't gotten any replies yet. Hopefully I'll get some help here. The first issue is the speedometer doesn't work. My S15 is a Spec S, but...
  6. E

    FS: S15 SR20DE NA exhaust manifold

    for sale exhaust manifold good condition (170.000km) SR20DE normally aspirated engine email for pictures info@nissan300zx.nl €100,-
  7. M

    S15 Spec R Project - Road sweeper :)

    Right well after (a much deserved lol) break, I went and got another Jap car on saturday As a little catch up here's some of my previous cars: S13 (ended up fully forged with a greedy TD06 25g strapped to it, slammed on grid drifts (first engine broke, then forged engine blow along with...
  8. S

    s15 bleeding wilwood brake issues

    need some help guys fitted my new wilwood kit today with 5.1 DOT brake fluid. Took the best part of 5hours and its still not complete because we cannot get the air out the system. started by bleeding the calipers, one at a time starting with N/S rear, O/S rear, N/S front then O/S...
  9. B

    WTB: S15 sr20det engine

    Hi I'm looking for an s15 engine , with or without wiring loom as I've got one! If anyone has one or knows of one let me know, thanks
  10. J

    moving the engine fuse box under the dash?

    yo, rekon this is too much effort for whats it worth? the engine bay is getting stripped, rust treated and painted next month and done know weither its worth getting this done in the mean time to free up some space?
  11. S

    Hks turbo suction funnel

    http://www.driftworks.com/shop/hks-suction-funnel-turbo-inlet.html Am interested in this product, has anyone used or given good feedback ffrom it. Obviously more air is good for engine but not all air is good what if it pulls heat and dust etc?
  12. R

    [VIDEO] Drifting killed 1JZ engine - Silvia S15

    Hi everyone Just wanted to share this with you guys. Diego Higa, Brazil´s youngest drift pilot, on the DS Brasil Series championship, drifting inside a soccer stadium in Brazil. Unfortunately the rev limiter killed the 1JZ engine, not making possible for Diego to participate on the...
  13. 2fst4u

    Oil Catch Can Solutions

    I've spent about 3 hours trying to look into this. What is the best solution to prevent blow-by in the engine case? By best solution I'm implying leaving out expensive external pumping options. Which rocker cover hoses can go where? And where should the catch can be placed (I.E, between which...
  14. J

    Bentley Continental GTC vs Detailing Jem

    I've been to do a Exterior detail with paint correction on this beautiful Bentley today:thumbs: Wheels had a decent coating of brake dust, but nothing too stubborn: The car was covered in swirls though: And quite a few deeper scratches, but nothing that couldn't be fully removed like...
  15. J0R04N

    Help needed!!! Strange jingle/ rattle noise at 3500rpm and above. Video included

    As in title. Any help would be greatly appreciated. Noise seems to come from the front LH upper part of the engine. http://www.youtube.com/watch?v=61dyITzn6bc&feature=youtube_gdata_player
  16. E

    WTB: wiring engine S15 and diagrams

    i am looking for engine wiring to ECU and diagrams to search somethings out because of engine swap in to a Datsun S15 SR20DE S-spec without turbo, with variabel valvetiming. please let me know!
  17. E

    Erica with S15 engine to swap in a Datsun roadster

    Hello guys and girls?! I bought myself a Silvia S15 engine with tranny ECU and MAF. This I will put in my Datsun Fairlady Roadster. They did it already in USA so Holland would be next :) S15 S-spec without Turbo but with variabel valve timing Only things are: I need an engine wiring to ECU...
  18. Ghost

    Air in cooling system

    as the title says i am getting air it the coolant, i can hear it bubbling when i turn off the engine. when having a look tonight we noticed it only started about 10 seconds after turning off the engine. the turbo lines have been replaced a few months ago because one of the water lines burst and...
  19. I

    does engine compression ratio affect drivability?

    Hey all This is been on my mind for quite some time now and i can never get a real answer from anyone. Question: does engine compression ratio affect drivability? im asking this because ever since iv installed my Tomei Poncams iv noticed that the drivability has been terrible. I don't mean by...
  20. 2fst4u

    Major noob question

    So I see a few cars that push out high power, or even just show cars, that run with no airflow sensor ahead of the turbo intake. How does this work? How does the ECU know what A/F ratio the engine is running and what do I need to run my engine like this? I like how clean it looks but can't...
Top