Search results

  1. dave_t

    WTB: Defi Boost Sensor (Link BF Series)

    I am after a replacement Defi Boost Sensor, for the Link BF series to fit the Control Unit II Example: PM me if you have one :thumbs: -David
  2. dave_t

    6-Speed Gearbox Rear Oil Seal (as the prop shagt enters the gearbox) - Part Number?

    I have my prop shaft out at the moment as I'm completing my undersealing, and before I refit is like to change the oil seal as I know they can leak from there. has anyone got the part number? Thanks in advance!
  3. dave_t

    Fitting Harnesses to Bucket Seats WITHOUT a cage

    I have a pair of Bride's i will be fitting to the S15 but i want to know if any of you guys have fitted a 4 point harness to a Silvia WITHOUT a Harness Bar on the roll cage. I dont plan on getting a cage anytime soon :down:
  4. dave_t

    BM57 - RHD - ABS - Part Number?

    Guys, my BM57 from a a JDM Z32 300ZX Twin Turbo is making a creaking noise, and been diagnosed as the seals have given up the ghost. Has anyone got a part number for one, as i want to order a brand new one
  5. dave_t

    WTB: Koyo Aluminium Radiator S14/S15

    I'm after a Koyo Aluminium Radiator for my S15 (same fitment as S14) Must be in good condition -Pm me for quickest response -David
  6. dave_t

    S14/S15 Front & Rear Ball Joints - The Same Part No.?

    Right, i am currently gathering parts for a full chassis refresh, and want to replace both the front and rear ball joints. Now i have found the MOOG front ball joints, http://www.frsport.com/Moog-K9820-Front-Lower-Ball-Joint-S14-240SX-EACH_p_16396.html...
  7. dave_t

    WTB: Wanted - S14/S15 Rear Seat Belt Buckle 'Recepaicles' x2

    Im after a pair of seat belt buckle 'Receptacles' from an s14/s15. example pic: If you have a pair, Pm me for quickest response :thumbs:
  8. dave_t

    FS: Side Mount Seat Rail - Drivers Side - S13/S14/S15 Fitment

    Item - This side mount seat rail came in my S15 from Japan, with a Bride ZETA. Auction pic: I reverted back to an OEM driver seats and sold the Bride, but kept the seat rail in case i ever went back to a bucket. Un-sure if the rail is a Bride, as was the Seat, due to not finding any...
  9. dave_t

    WTB: Wanted - Bride Seat Belt Anchor Bracket (Pics Inside)

    I have a pair of BRIDE ZETA III's with BRIDE FG Rails which im fitting to my S15 Silvia and retaining the OEM seat belts. The FG rails should both come with a bracket to mount your OEM seat belt 'receptacle', but one of them is missing from my passenger side rail - they are not needed when...
  10. dave_t

    FS: Driftworks Super Low Adjustable Sidemount Seat Rail (Drivers Side) - S13/S14/S15

    Item: Driftworks Super Low Adjustable Sidemount Seat Rail (Drivers Side) - S13/S14/S15 Fitment Bought this at the start of the year with the intention of fitting a bucket seat but recently picked up a pair of Brides with seat rails already attached, so no longer need this. Nicely designed...
  11. dave_t

    BM57 (Z32) Master Cylinder Rebuild?

    Last year i upgraded my whole braking system - up front i went with K-Sport 8-Pot 330mm, and at the rear i fitted the Z32 Rear Brake conversion. To make use of the extra braking power, i upgraded the OEM master cylinder, to the Z32 BM57. Now over the last few weeks, i have noticed a...
  12. dave_t

    WTB: S15 Ganador Mirrors

    I'm after a set of S15 GENUINE Ganador door Mirrors. pm me if you have some :thumbs: example pic:
  13. dave_t

    Nismo 2-Way Diff Oil

    I have recently purchased a Nismo 2-Way LSD Diff for my S15, already in an S15 Casing etc. but i'd like to do an oil change before fitting it to the car. Now what oil is recommended for the Nismo 2-way? i havent found much info -Thanks -David
  14. dave_t

    WTB: s14/s15 Side Mount Seat Rail (Drivers)

    After a drivers side - side-mount seat rail for my S15 (same fitment as S14) It is to fit a Recaro Pole Position so must be wide enough PM me for quickest response
  15. dave_t

    Recaro Pole Position - What Seat Rail?

    Iv'e recently bought a nice Red Recaro Pole Position for the S15 :cool: BUT offering it up to my Side Mount Seat Rail that came in my S15 from Japan, to which a Bride ZETA was fitted, the seat is simply too wide for the rail. Have any of you guys ran a Pole Position? what rail is recommended?
  16. dave_t

    S15 GT, R34 V-Spec II & 350Z 380RS Pedal Install Guide

    In the whole of the INTERNETZ i could not find much info on the compatibility of these pedals for the S15, and ZERO information on whether the R34 dead pedal could be used on the S15, so i have decided to put together a guide. What you will need: S15 GT/R34 GT-R Vspec II Pedal Set 1...
  17. dave_t

    C's Short Shifter Installed! + Rubber Boot Mod + Shifter Surround Refurb

    Well as soon as the C's Shifter arrived, i couldn't wait to unbox it! I cleaned it thoroughly, and got to greasing it for a nice smooth operation. I then followed this fitting guide - http://http://www.jull.net/s15-tech-guides/c-short-shifter Very easy Install Now even with my OEM...
  18. dave_t

    S15 Alloy Dead Pedal/Foot Rest

    Well i have just ordered the R34 GTR/NISMO 380RS Alloy Pedal Set for my S15. Google Pic of Example Fitted Be great for heel-toe :thumbs: Now the R34 Dead Pedal is a different shape to our S15's, so the Alloy Plate will not fit. Does anyone know of an OEM or Aftermarket Alloy Dead Pedal...
  19. dave_t

    WTB: S15 Sound Deadening Around Shifter & Rubber Shifter Boot

    I'm after the oem sound deadening which fits around the shifter, and also the rubber shifter boot. i have pictured them below: Sound Deadening Rubber Boot If anyone has either or better yet both, PM me for quickest response! Thanks David
  20. dave_t

    WTB: S15 OEM Gear Knob Insert (Grey Plastic Lower Bit)

    I'm after a spare OEM Plastic Insert, the grey lower part of the oem knob, which is removable - pictured below. I know a lot of people change their oem knob and probably have it going spare :thumbs: Paint condition not important. PM me for quickest response -Thanks -David
Top