What's new

Search results

  1. C

    FS: Radio wiring converter

    I bought this ages ago and didn't need it in the end. It is the right one for these cars. £5 delivered to UK
  2. C

    Gauging interest: S15 Aero rear spats

    Hello :) Just trying to gauge the interest in rear Aero spats. As usual, the more people interested the cheaper they will be but please only register interest if your serious about wanting a set. The purpose of this thread is to work out the production cost and the viability of them. They...
  3. C

    FS: Apex twin electric fans, fan shroud, Revotec fan controller and silicone rad hoses

    I'm selling my Apex twin fan setup. It's been on the car since last summer and has probably only done 1000 miles if that. Condition is very good. I had to trim a corner off the fan shroud for it to clear my I/C pipe work. I will include basic instructions too for DIY install. These fans are more...
  4. C

    FS: S15 Carbon Exhaust Manifold / ABS Unit Heat Shields - BIG REDUCTION - £57.50 inc del

    Purpose The purpose of this product is to significantly reduce the amount of heat istransferred to the ABS unit, brake lines and consequently the brake fluid, from the exhaust manifold and turbocharger. These are especially useful when you are using an aftermarket tubular exhaust manifold or a...
  5. C

    Speed Awareness Courses

    Has anyone attended one of these courses to avoid penalty points on their licence? Yes, I got busted yesterday... in my Punto! I was told at the road-side to not pay the £60 fine or they'll give me the points automatically, but the cop on the desk at Oxford said I need to pay the fine and then...
  6. C

    The ultimate gearbox thread!

    Gearbox failure is relatively common and the information about it seems to be scattered all over the forum, so here it is, all condensed into one thread. Thanks to _Wing_ for suggesting the idea. The options are.. Replace 6-speed box Convert to S14 5-speed box Uprated gear sets for...
  7. C

    FS: Subframe locking collars

    Apex Perfrormance sbuframe locking collars - link They are used but in VGC - about a year old now. These eliminate any play in your rubber subframe bushes and lock the subframe solid to the underside of your car. Reduces axle tramp and holds everything together as it should be. Dead easy...
  8. C

    FS: Driftworks Polybushes

    Here I have.. 1x Set of Subframe Polybushes/plates (4 bushes total) 1x Set of Front LCA bushes (2 bushes total) 1x Set of Rear LCA bushes (4 bushes total) 4x Sets of rear control arm bushes (8 bushes total) I bought them a few months ago but have decided not to fit them...
  9. C

    Polybush lube

    What sort of lube is best to use with polybushes? I've ordered a load of bushes but forgot the lube and as they are coming from America, would prefer to get some from a shop over here. :)
  10. C

    Gauging interest - Exhaust manifold/ABS unit heat shields

    I'm in the process of getting these made but would like to gauge interest before I order the materials. S15OC Exhaust manifold/ABS unit heat shields Purpose The purpose of this product is to significantly reduce the amount of heat transferred to the ABS unit, brake lines and...
  11. C

    FS: RAYS Gram Lights 57S wheels 4x114.3 16"

    RAYS Gram Lights 57S I bought these wheels a few months ago from a member on here with the intention of fitting them on my MX5 which I have since sold. One of the rear wheels had a slight ding in the rim lip where it had been curbed so I had the set professionally refurbished and powder...
  12. C

    Z32 bmc

    What difference does fitting a Z32 BMC actually make? At the moment my brakes are really sharp (K-Sport 8 pot fronts and standard rears) and the brake pedal hardly moves when I apply the brakes. I am fitting the K-Sport rear setup very soon too though, hence this question. Would the Z32 BMC...
  13. C

    Metal fabricator required!

    Does anyone have the above skills?! I need a couple of simple brackets making from 3mm steel. Just one flat plate with a hole in it, and another small plate TIG welding to it at 90 degrees. Will exchange for beer tokens, of course :)
  14. C

    Bushes - solid v poly

    I can't decide what setup to go for with the diff/subframe bushes. Was originally planning to go solid in the diff and subframe but had a re-think and decided to go for solid diff and poly subframe, but still not 100% sure :rolleyes: What combinations are you guys running and what do you think...
  15. C

    FS: Gloss black intake plenum

    This is a standard intake plenum that I bought from Dean a few months back. I had it smoothed off and powdercoated black to match my rocker cover but have since changed my mind about it and have bought a greddy plenum instead. It's in as new condition and has not been fitted since...
  16. C

    WTB: Center console / armrest cover

    Looking for a center console armrest lid/cover to aid my next project! Only really need the lid but will take the whole console section if necessary. Condition is not important. If you don't live in the UK it is really easy to send things abroard, so please don't let that put you off :)...
  17. C

    White s15, Wolverhampton ring road.

    I'm fairly sure it was Tom (sliding-r) but not certain. Was on the Wolverhampton ring road, tonight at 19.30. Would have given you a wave but wasn't in the 15. :wave:
  18. C

    FS: Origin style LED tail lights

    Origin stlye LED tail lights (unknown brand) The right hand light has a vertical row of LED's that don't illuminate on sidelight brightness (brake brightness works fine AFAIK). I dont know why this is as I've not had a look. May be easy to fix but may not. Also, on the same light, the reverse...
  19. C

    FS: X Box 360 Pro Console (60GB) HDMI version

    X Box 360 Pro 60GB Comes boxed and in virtually as new condition. It is the latest version with the HDMI output, wireless controler etc. Comes with everything that was in the box when new. I've barely used it at all, just haven't got time for things like this now. Never had any problems with...
  20. C

    FS: 'Faulty' Carbon Kevlar cooling panel.

    This is the first carbon kevlar panel I had made. It has got a strand of carbon fibre stuck in the resin (must have statically jumped there when they were laying the carbon kevlar onto resin). It also has an area where the weave is crumpled slightly and a few bubbles in the resin. Could be...
17,172Threads
161,126Messages
12,204Members
SharonBellaLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
1
Guests online
113
Total visitors
114
Totals may include hidden visitors.
Top