What's new

My daily pearl white

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
Was any of this rust visible from the outside before this work started? It makes me scared to find out what's going on under the paint on mine
There was definitely surface rust underneath and some discoloration happening around the strut tower panels . The guy doing the work told me the sills and engine bay almost always end up hiding something .
The C-pillar did really surprise me as there was only a small 3mm hole visible on the panel .
I daily drove my car for 7 years no matter the season or weather so rust was going to happen sooner or later .
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
Last update from HTDevelopments before Christmas . The metal work is nearly done, there is only the driver side rear rail to put back on the car and check behind the last quarter panel to make sure no rust is left .
DRIVER_SILL_REPAIR_3.jpgDRIVER_SILL_REPAIR_2.jpgDRIVER_SILL_REPAIR_1.jpgPASSENGER_SEAL_REPAIR_FINISH_3.jpgPASSENGER_SEAL_REPAIR_FINISH_2.jpgPASSENGER_SEAL_REPAIR_FINISH_1.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
FINAL_SILL_REPAIR_1.jpgFINAL_SILL_REPAIR_2.jpgFINAL_SILL_REPAIR_3.jpgFINAL_SILL_REPAIR_4.jpgFINAL_SILL_REPAIR_5.jpg

The rear arch lip has been removed and replaced by a rod . This will free some space for my rear new wheels while keeping a clean look as well as getting rid of the panels overlap where rust starts .

PASSENGER_ARCH_LIP_REMOVAL_1.jpgPASSENGER_ARCH_LIP_REMOVAL_2.jpgPASSENGER_ARCH_LIP_REMOVAL_3.jpgPASSENGER_ARCH_LIP_REMOVAL_4.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
New update from HTDevelopments . The driver quarter panel was removed . We were expecting it to be the cleaner side, unfortunately there was quite a lot of rust hiding there as well .
DRIVER_PANEL_REMOVAL_1.jpgDRIVER_PANEL_REMOVAL_2.jpgDRIVER_PANEL_REMOVAL_3.jpgDRIVER_PANEL_REMOVAL_4.jpgDRIVER_PANEL_REMOVAL_5.jpgDRIVER_PANEL_REMOVAL_6.jpgDRIVER_PANEL_REMOVAL_7.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
Last nasty little surprise to deal with and this is officially the end of the metal work !

DRIVER_QUATER_PANEL_FINAL_1.jpgDRIVER_QUATER_PANEL_FINAL_2.jpgDRIVER_QUATER_PANEL_FINAL_3.jpgDRIVER_QUATER_PANEL_FINAL_4.jpgDRIVER_QUATER_PANEL_FINAL_5.jpgDRIVER_QUATER_PANEL_FINAL_6.jpgDRIVER_QUATER_PANEL_FINAL_7.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
Now all the rust and welding has been dealt with, the guys at HTDevelopments started prepping the underfloor . Hopefully it's all smooth sailing from now on .
PRIMER_1.jpgPRIMER_2.jpgPRIMER_3.jpgPRIMER_4.jpgPRIMER_5.jpgPRIMER_6.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
Latest update from HTDevelopments . Stone chipping protection and coat of white now applied .

STONE_SHIPPING_1.jpgSTONE_SHIPPING_2.jpgSTONE_SHIPPING_3.jpg
WHITE_COAT_1.jpgWHITE_COAT_2.jpgWHITE_COAT_3.jpgWHITE_COAT_4.jpgWHITE_COAT_5.jpgWHITE_COAT_6.jpgWHITE_COAT_7.jpg
 

bzh kevin

Joined
22 September 2015
Messages
92
Reaction score
22
Points
8
Location
bedford
Country
How long has the car been with HTD now? This work is unreal
They started on the car around mid-June last year, they have been working on it on and off until last February, since then it's been stored and waiting for paint .
HTD could have done it quicker but there was a lot more work than originally expected and the work had to slow down so I could manage the budget a bit easier .
 
Joined
28 May 2023
Messages
11
Reaction score
3
Points
3
Location
UK
Can I DM you to talk in more detail about the financial side of this? I'm keen to weigh up a project like this on mine since I know it will need doing
 
Top