fez06 Joined 21 July 2011 Messages 500 Reaction score 0 Points 0 Location England Country 14 April 2013 #1 Will an s13 one fit on an s15 or is it a different fitting kit ? Cheers
Jay-pan ⭐ Joined 6 May 2012 Messages 651 Reaction score 0 Points 16 Location Shropshire. UK Country 14 April 2013 #2 As long as its a walbro (GSS342) they will fit s13-s15 models
spoonman Joined 9 September 2009 Messages 1,864 Reaction score 0 Points 0 Location New Zealand Country 15 April 2013 #3 once you pull the cradle out you will see that any pump can fit as long as you wrap a rubber boot around it and cable tie it too the cradle
once you pull the cradle out you will see that any pump can fit as long as you wrap a rubber boot around it and cable tie it too the cradle
fez06 Joined 21 July 2011 Messages 500 Reaction score 0 Points 0 Location England Country 15 April 2013 #4 Cool cheers guys
fez06 Joined 21 July 2011 Messages 500 Reaction score 0 Points 0 Location England Country 28 April 2013 #5 Iv got the pump but it says gss341 on it
spoonman Joined 9 September 2009 Messages 1,864 Reaction score 0 Points 0 Location New Zealand Country 28 April 2013 #6 red wire, 12v supply, black wire earth, stick filter on one end and the other is the supply to your engine, wrap in a rubber boot and cable to firmly into your cradle, done http://jull.net/s14-s15-tech-guides/fit-walbro
red wire, 12v supply, black wire earth, stick filter on one end and the other is the supply to your engine, wrap in a rubber boot and cable to firmly into your cradle, done http://jull.net/s14-s15-tech-guides/fit-walbro