What's new

FS: Huge spec 1JZ S15 breaking - Bride/Volk/Holset/R154/Exedy/Spec R Aero

Joined
10 May 2012
Messages
73
Reaction score
0
Points
0
Location
Northern Ireland
Country
It pains me to do this but unfortunately after the 1JZ engine starting to rattle yesterday I have decided to break my 1JZ S15. I have spent two years slowly building the car and unfortunately now have lost heart and want to go back to owning a 180sx which I care less about and don’t mind pranging off walls.

Please note, the car is still whole and driving and will not be stripped until 2 weeks’ time (due to work commitments). Once the car has been stripped the items that have not had a deposit placed on them will be photographed.

All prices are collected from Northern Ireland, however I can arrange postage at buyer’s expense, all items will be wrapped correctly or large items can be put on a pallet for collection.

Deposit/full payment can be taken on all items and upon removing them from the car they will be posted out. Please note I offer NO refund on the deposits placed, I do not want my time wasted.

Please no silly offers. All payments/deposits by Paypal with fees covered or as gift.

The car is currently sitting as pictured.














S15 Shell – Headlights, tail lights, full interior bar seats/steering wheel, bonnet, doors, all glass, mint underneath, has a modified slam panel for the 1JZ swap but can include the original section to be put back in, Car was previously in the South of Ireland so has had VRT paid, in the UK its MOT’d until January 2016 – Decent offers please.


R154 Gearbox – Good condition with smooth changes, always ran with fresh oil. Bare box. £900


R154 > 1JZ Bellhousing - £220


Exedy Single Stage, Clutch, Flywheel and pressure plate - £250


R154 extended shifter (custom made) all high quality TIG welded - SOLD.


Will do the gearbox, bellhousing, clutch and shifter as a package for - £1370


1JZ > Sbody prop shaft, welded and balanced by Richard Bradley - £100


Holset HY35 Turbo, 2.5” outlet, internal wastegate has been TIG welded shut, comes with lines to fit 1JZ, the correct restrictor and fittings. Has been ran on my car for less than 4000 miles - DEPOSIT TAKEN.


1JZ Toyosport Single turbo manifold, has had the wastegate position modified to clear an Sbody steering rack, also has a strength bar added. Can include new gasket - DEPOSIT TAKEN.


50mm Wastegate – fits the above manifold via Vband. - DEPOSIT TAKEN.


Front Mount Intercooler - £100


50mm Rad modified to fit a JZ Sbody, all TIG welded - £100


2JZ/1JZ Alternator, was bought as a reconditioned unit only 4 months ago - £80


1JZ GTE Soarer Auto ECU – £80


1JZ > Sbody conversion mounts, Engine & Gearbox - £100


Full JZ Sbody HKS Hi Power exhaust system, including silencer, Tig welded together to fit, has some scrape marks in the mid-section where the car was running low - £200


Turbo 2.5” > 3” 1JZ Exhaust downpipe, with flanges for AFM and Lambda, clears steering knuckle - DEPOSIT TAKEN.


1JZ Front sump, some light marks from running low, needs a new bung bolt - £250


Daiyama coilovers, all good condition and were almost new when I put them in - £330


S14/S15 adjustable rear arm set - £100


S14/S15 Subframe with solid driftworks bushes - £80


Skyline R33 brake set up, with handbrake. Drilled and grooved discs, meaty pads. - £400


Skyline R33 braided brake lines front and rear - £40


S15 Spec R Aero front bumper, genuine plastic, has had repair work from being damaged before, front lower lip still has some minor marks and a small graze on passenger side from touching kerb - £600


S15 Spec R Aero skirts, genuine plastic, good condition - £300


S15 Spec R rear bumper with Aero spats, genuine plastic, good condition - £300


Will do the bumpers, spats and skirts as a package for - £1100


Origin front over fenders, genuine origin purchased from Japan - £180


Origin rear over fenders, genuine origin purchased from Japan - £150


Origin rear roof spoiler, genuine origin purchased from Japan - SOLD


Defi style oil temp gauge - £25


Defi style oil pressure gauge - £25


Defi style water temp gauge - £25


Defi style RPM gauge - £25


HKS Turbo timer - £25


Blitz old school boost controller, hi/low boost with scramble boost, everything present including all wiring - PROV SOLD


AEM Air/Fuel ration kit, everything included, 5 months old - DEPOSIT TAKEN.


Volk GTC 18x10 ET–2 18x9 ET0, some marks on the lips but overall in good condition, no bends or buckles, come with two brand new tyres on front and worn ones on the rear. These are very aggressive and rare - £1350


Bride Vios Low Max, Kevlar backed, pair, both in very good condition, comes with universal rails - £550


Bride super low driver side rail, side mount – £130


Please private message me if you are interested in parts.


Thanks


Dylan.
 
Last edited:
Joined
21 July 2011
Messages
500
Reaction score
0
Points
0
Location
England
Country
Can I have pics of the seats please and are the reps?
 
Joined
23 September 2014
Messages
94
Reaction score
0
Points
0
Location
Maryland
Country
Unfortunately would not like to do it that way as there is more ££ in breaking it. Thanks for the interest though :)
what a shame. what would you take for the car if you did sell it whole? It would probably pull in $35,000USD here in the states
 
Last edited:

Naj

Joined
23 January 2014
Messages
11
Reaction score
0
Points
0
Location
Essex
Country
Hi Mate very Interested in the Coilovers, Just a quick question is there any knocks from the top mounts or from the shocks? If all is good i am happy to leave a deposit with you untill they are off the car.
 

Cess

Staff member
Moderator
Instagram Staff
Joined
10 February 2013
Messages
375
Reaction score
4
Points
18
Location
Northern Ireland
Country
I don't think Choppy is on here much. I'd pm him to make sure he gets an email alert.

Gutted he's breaking this car.
 
Joined
29 July 2013
Messages
274
Reaction score
0
Points
0
Location
Derby
Country
Have you got all the clips & screws for the front arch liners for sale?
 
Top