What's new

HALTECH - won't spark

DOM

Joined
11 May 2006
Messages
99
Reaction score
0
Points
6
Location
Milton Keynes
Has anyone got a Haltech ( in specific e8) to run on an s15 successfully?

My s15 has been in the garage for 5 months. In which time the ecu has gone round the other side of the world to Australia for tests by Haltech themselves. The ecu has been returned with no fault as it worked on an 2 other cars (not s15 though)

A new loom was made and still this does not work. We are wondering if there is something different with s15 coil and ignitors. Are there any differences in the ignition system to s14?

Any advice would be appreicated.
 

meddler

It's not easy being a green text speak nazi
Staff member
Moderator
Joined
17 October 2007
Messages
3,085
Reaction score
0
Points
36
Location
Australia
Country
I would say the S15 ignition system is different to the S14. There are differences in the wiring between the ADM and the JDM S15 as well, so it depends on what wiring diagram you are using too.
 

DOM

Joined
11 May 2006
Messages
99
Reaction score
0
Points
6
Location
Milton Keynes
Tuner said he checked the wiring, taking into account that Haltech ecus are from Australia, but the wiring is apparently okay.

The issue is that it has rpm trigger and home signals and has injection, just no spark.

He had switched on and also eliminated the eccs relay with the same results.

We are really wondering if haltechs work with s15 at all.

Has anyone managed to get these ecu to work with a s15?
 
Last edited:
Top