- Joined
- 31 December 2023
- Messages
- 12
- Reaction score
- 4
- Points
- 3
- Location
- Victoria
- Website
- www.youtube.com
- @auditt3.6
Our rescue S15 come with a shaved boot (no lock cylinder) which also means someone went in and deleted whatever wing was there in the first place.
To my suprise I saw that someone had welded up the original holes (badly) and covered them with silicone (badly). So off that went and drilled some holes to enable installation of the wing. All that's left to do is run the wiring and connect to the OEM 3rd brake light. Didn't take too long.
To make sure there spoiler is watertight I cut pieces to do under the mounting points from closed cell foam from Bunnings as i couldn't find any PN to replace the super flat and torn ones already on there. Full installation video guide below:
To my suprise I saw that someone had welded up the original holes (badly) and covered them with silicone (badly). So off that went and drilled some holes to enable installation of the wing. All that's left to do is run the wiring and connect to the OEM 3rd brake light. Didn't take too long.
To make sure there spoiler is watertight I cut pieces to do under the mounting points from closed cell foam from Bunnings as i couldn't find any PN to replace the super flat and torn ones already on there. Full installation video guide below: