So here's the deal I'm looking to put a lsd in my 1999 spec-s. From my resurch I believe it currently has a open diff system. So my question is will I have to change the whole diff housing or can I still just drop in the gear box and go?
SOLD
As title a genuine and good working order Z33/R35 MAF with pigtail, housing and honeycomb air straightener.
Housing bolt holes slightly opened up so bolts directly onto Apexi filter.
Good for 440hp or more in a bigger housing, can be run blow through and also less effected by preturbo...
has anyone fitted Uk spec stalks in the 15 from a UK 14/a?
it's doing my head in when turning and the wipers come on.
i know the stalks simply screw onto the main wheel housing assy but not yet looked into wether the fitments are the same.
As title! I'm selling my Holset hx30w 9cm exhaust housing twin scroll, vband fitment anti surge / ported compressor housing turbo. (It needs a rebuild) due to quite a bit of play in the shaft! There's no smoke even on boost and no damage to fins. But in my opinion it will need a rebuild. This...
I'm looking for the circular plastic cap that screws into the rear of the headlight assembly.
This one:
Has anyone ever bought just the rear cap on the S15 headlight housing seperately without buying the whole headight assembly? The Nissan dealers around here said they won't sell me it (I live...
Well shortly after getting my car back from getting the head gasket replaced, I've run into some more smoke out of the exhaust.
At first I figured it was due to the cold weather, but recently I've noticed that it has been smoking a lot more then normal.
I'm not sure on the brand my turbo is...
I just purchased some black housing lights since i prefer those.
Hence these silver ones from my L-Package s15 are up for sale.
Price: 350,-
Missing the sockets for the highbeams
Still has the standard light image and has not been converted for right lane driving.
I bought a new GT3071R a few weeks back but only wanted the core. I've got the brand new casings available.
.50 a/r compressor housing with adaptor ring and clamps. The will fit any 56 trim 3071 or 2871. If you need help knowing what size wheel youve got give me its measurements and I'll let...
My 5th/Reverse selector fork needs to be put back into position as i took out the bolt that holds it by mistake :o
I know i need to remove the gearbox to fix it but what i want to know is, when i have the gearbox out, is there much work required to access the selector fork..my guess is that i...
SR20 thermostat housing, the one that the bottom hose clamps to, tube and the dome with three bolt holes. assuming they are the same on S15 and S14.. I need s15 one if not.
As the above. Non-HID and the original black housing.
The housing on mine has gone crack and now its a waterfall inside of the headlight, looks crap and police no likey here.
Helpz
okay okay, there is probs a thread out there that answers all these questions but i want to be certain.
today i figured out my s15 spec s has a viscous diff, and i was told that they are half decent.
i feel it slips often and i was told to upgrade the oil, will this help the lsd hold on to both...
Ok guys...
Major PITA going down my end at the mo... only had the turbo gaskets all re-done with new braided lines last autumn and not even 8 months down the line, it seems my turbo to elbow gasket, the top two nuts are always coming loose.
So... I've managed to re-tighten one closest to me...
To comply NZ law here, I need to have proper HID conversion kit which includes adjusting the angle of light and the housing.
as far as I'm concerned, both S15 HID and non HID (just projection type) have same housing? So if I can just add in the adjuster with controller on the dash, will that...
Hi Guys,
Does anybody know the part number for the thermostat housing for an s15?
Also the gold heater tube connected between the block and thermostat housing (under the intake manifold)?
Is there a website (nissan) where i can order the parts?
Really need one badly, there seems to be coolant...
this was removed from my car to make way for a 2871r and no other reason, its in superb condition, the car drove faultless with it fitted. there is NO play in the shaft, ive tried to find any but cant on either turbine in and out or side to side. the car was standard when i got it and it was...
due to some silly **** pulling out in front of me i now need a new driver side headlight. :furious:
anyone got any knocking about? i dont need bulbs etc just the light unit itself. have to be the HID ones.
thanks.
also, does anyone know if the HID units are usable on the non hid headlight...
right lads, im going to give the car a full fluid change with Royal Purple.
any ideas as to how much oil ill need for....
- Engine
- Gearbox
- Diff housing
muchos thankies.