Search results
-
S14 clutch master cylinder in S15
Hi guys, Just wanted to know if an S14 clutch master cylinder would fit in my s15. Had it rebuilt with a repair kit, was fine for a few months and now its failing again. Thanks!!- fadli256
- Thread
- Replies: 1
- Forum: Mechanical & Bodywork
-
Spec S cluster on a Spec R???
Hi guys As per title, Are they the same? thanks :)- fadli256
- Thread
- Replies: 6
- Forum: Electrical & Audio
-
Speedometer stopped working
My speedometer just died on me :(. Everything on the cluster still works including my odometer. I can still get a speed readout on my pfc hand controller. Havent had a de-limiter of any kind installed according to my mechanic (no spliced wires) Any input would be great guys. Thanks :)- fadli256
- Thread
- Replies: 5
- Forum: Mechanical & Bodywork
-
18x8 42 offset for Stock S15
Found a set of TE37 with above mentioned offset (all around). Currently running on stock suspension with lowered springs. Can anyone give a bit of feedback? Couldnt find the answers in the wheel thread- fadli256
- Thread
- Replies: 2
- Forum: Mechanical & Bodywork
-
Hks evcs
Hello there guys, Has anyone set the HKS EVC-S EBC before? My instruction manual is in japanese. A few pointers before i fiddle with the controller?- fadli256
- Thread
- Replies: 0
- Forum: Mechanical & Bodywork
-
Driver side door lock and window problem
Hi guys, Im encountring problems with my JDM spec S15 spec R drivers side switches 1) Power window - switch wont move window. Switch has clicking noise, as does the regulator (regulator becomes warm when switch is activated) but the window wont go up. Passenger side works fine. 2) Power door...- fadli256
- Thread
- Replies: 4
- Forum: Electrical & Audio
-
AEM Tru boost controller
Hi guys, Just wanted to know if anyone is currently using the aem tru boost controller on their s15. Does it fit into the standard pillar gauge pod? Uppin' the boost soon and I dont want to clutter up the dash with them gizmos.- fadli256
- Thread
- Replies: 2
- Forum: Mechanical & Bodywork
-
Ebay GReddy cams?
I found a set of GReddy 256/264 camshaft set on ebay. Seriously interested in getting them. But, I dont know if this is gonna affect my timing, idle. Do I need a remap after installing the cams?? Advice please =) Currently running a FMIC, Turboback, Eq.Length tubular exh manifold.- fadli256
- Thread
- Replies: 11
- Forum: Mechanical & Bodywork
-
HKS FCON IS vs APEXi Power FC vs Greddy Emanage Ultimate
Hi guys, I just want to get your perspective on these three ECUs'. Pros and cons, such and such.- fadli256
- Thread
- Replies: 22
- Forum: Electrical & Audio
-
Boosting help
Hi guys, Hope you can help me with this I only have a FMIC, full exhaust system (only from downpipe to the cat-back) and aftermarket air cleaner. Planning to get the HKS FCON IS ECU and HKS EVC boost controller along with an aluminium radiator by end of this year. Im currently running on...- fadli256
- Thread
- Replies: 5
- Forum: Mechanical & Bodywork
-
Boost meter N sender unit
Can anyone give me instructions on how to remove the boost meter, what is the code for the wire colour. and where the boost sender unit is located? JDM S15 Thanks guys :D- fadli256
- Thread
- Replies: 1
- Forum: Mechanical & Bodywork
-
Blue smoke at idle
I noticed I have bluish smoke coming out of my exhaust during idle. But, it comes and goes only for such a short period. Im still on stock turbo with almost 70k mileage. Really hope its not my turbo :S heeeeeeeeeeelp!!- fadli256
- Thread
- Replies: 3
- Forum: Mechanical & Bodywork
-
Stock boost meter problem
Hi guys, wonder if anyone can help me. Just got my s15 today. Stock boost meter is dead, it worked for a few minutes, played around a bit and went dead at bottom reading. Hope u guys can help before i send it to the tuners w/shop- fadli256
- Thread
- Replies: 3
- Forum: Mechanical & Bodywork
-