Meet: West Malaysian S15 owners, pls visit here:

[Cross]

Alvin, let me know when u need. I got jalan bring in Rims from Japan d Wont be around this weekend but will get to you next week or something. Manage to get myself a 17" Nismo GT4 with skyline offsets for cheap too

 

[MaGiC55]

Manage to get myself a 17" Nismo GT4 with skyline offsets for cheap too

i want!!!! can u get me one set too...then i can sell my ssr type c to kenji

 

[MrSilvia]

Hi ... I just saw a thread in zerotohundred.com that HPC is organizing a track day on 4th October 2009. Anyone interested to join?

 

[kennji]

would you like Nismo LMGT-4 in White?? Offset is 30/40 if i remember correctly. i had someone selling at Singapore...looking at S$2k with Tyre.

Hi bro. i'm actually looking for wider thread size, and from the 30/40 offset, its most probably be the normal 7.5jj/8.5jj which is a lil bit too small...thank though

Alvin, let me know when u need. I got jalan bring in Rims from Japan d Wont be around this weekend but will get to you next week or something. Manage to get myself a 17" Nismo GT4 with skyline offsets for cheap too

i'm not in kl too. we can talk through phone for this. i'm looking for some 8jj/8.5jj, +25 ~ 29 offset for front, 9jj/9.5jj, +35 ~ 38 offset for rear. yaya...odd numbers...

As for the HPC, i'd join if i'm around or if the car is ready. just ripped my gearbox mainshaft...

 

[popyenomoresailor]

Hej Kennji..yeah...7.5/8.5j is kind of small...i myself already using 8.5/9.5J which i think it had bring good stability to the car.

BTW Cross, beside rim can u bring in other stuff??

 

[gunner93]

Hi ... I just saw a thread in zerotohundred.com that HPC is organizing a track day on 4th October 2009. Anyone interested to join?

Hmmm maybe still got time to boost up slightly and do a retune. Still trying to break the illusive 2:30 barrier... Gatal edi duh. :wack: Also fresh gear oil after what happened to my gear box last track day.

 

[MrSilvia]

Hmmm maybe still got time to boost up slightly and do a retune. Still trying to break the illusive 2:30 barrier... Gatal edi duh. :wack: Also fresh gear oil after what happened to my gear box last track day.

This track day is "South Track" ... not full track oh .... so I dun think u can make a break ....!

 

[one8t]

eh bagus ni. i also looking for rims. just did my 5 lug conversion.

cross: do i hear cheap from japan? im looking for work emotion xt7 8j + 32 front....9j +28 rear...both bronze only.

 

[bvalve]

Hej Kennji..yeah...7.5/8.5j is kind of small...i myself already using 8.5/9.5J which i think it had bring good stability to the car.

BTW Cross, beside rim can u bring in other stuff??

would like to know what is the offset of 9.5j that u using?

 

[bvalve]

Alvin, let me know when u need. I got jalan bring in Rims from Japan d Wont be around this weekend but will get to you next week or something. Manage to get myself a 17" Nismo GT4 with skyline offsets for cheap too

+12 offset will come out from the rear fender of s15.won't it?

 

[popyenomoresailor]

hey Bvalve, my rear 9.5J offset is +38. just flushed with the rear fender nicely.

 

[bvalve]

what tyre size u put?
245?255?265?

 

[popyenomoresailor]

using 245/40. which had filled up the arch nicely. no rubbing!

 

[Cross]

Basically, I've got a contact who ships in at quite reasonable prices from auction bids and yeah he can ship in other stuffs as well. But so far rims are cheaper to get compared to other stuff eg. bodyparts

Magic55: Yeah will let you know. We discuss at next TT la

Kenji: Will let you know too and check which rims you really looking for. SSR is semi forged btw. 8.5 front and 9.5 rear should be good in my opinion

one8t: Drop by TT and let me know what's your budget la. New or used? With or without tires? Saw a few XT7's but not sure of the prices yet

bvalve: yeah +12 will definitely need wider arches, +22 on a 9j already sticking out abit. Unfortunately i lost the bid for a 10j +12 rim wanted to go wide.

On average 9.5j rear would still clear with +30. BTW anyone interested in a set of 17" bronze Buddy Club P1's

 

[silviatub]

Hi Mates,

Just changed my clutch on my JDM Spec R. Retained the dual mass flywheel and opted out for the standard clutch from Daikin/Exedy. Below are the part no's :

Clutch Cover : NSC 599 (for Nissan Serena SR20DE) or NSC 538 which has higher clamping pressure

Clutch Plate : ISD104US

The clutch disc and cover fitted perfectly and is much softer than standard and feels good so far. This is the cheapest option i have found and want to share this for those who want to retain the dual mass flywheel without burning a hole through the wallet.

Initial impressions were the clutch plate looked different from stock as it had damper type clutch disc compared to the stock solid type clutch disc.

Hope this info helps all S15 brothers out there!

 

[bvalve]

any idea how many hp the clutch can withstand?

how much u bought it?care to share?

 

[silviatub]

any idea how many hp the clutch can withstand?

how much u bought it?care to share?

Bro,

Not too sure how much of hp the clutch can take. Dangermouse has used it for regular drifting and hard driving...he can comment more on this...

Bearing = RM 65.00
Plate = RM 95.00
Clutch Cover = RM 320.00

Total = RM480.00

I bought it from AME Auto in Seapark, PJ

:thumbs:

 

[kennji]

hi cross, maybe something like advan rg 17" 8.5 +30, 9.5 +38, or advan rs, are they cheap there? else maybe some re30 too? or any other suggestions or suitable rims u spotted there?

 

[popyenomoresailor]

Hi Kennji, i had made enquiry before in Singapore for Advan RS 17' as i'm also interest in it. they had quoted me approx S$600 per piece for any Offset, not sure about the price in Malaysia though. you may had a check on this.

 

[kennji]

yep. thats what i heard too. somewhere within the range of S$6xx per piece. the problem buying from s'pore remains the same: item too big, sure kena custom tax one. unless i tow the car in without any rims/tyres? hahaha...might just settle with an advan rg if cannot find others. someone selling in sunway,asking rm4500 i think...cheaper temporary solution than an re30.